diff --git a/LICENSE b/LICENSE
index a3ce17a..cc3e245 100644
--- a/LICENSE
+++ b/LICENSE
@@ -1,21 +1,427 @@
-MIT License
+Attribution-ShareAlike 4.0 International
-Copyright (c) 2022 XenGi
+=======================================================================
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
+Creative Commons Corporation ("Creative Commons") is not a law firm and
+does not provide legal services or legal advice. Distribution of
+Creative Commons public licenses does not create a lawyer-client or
+other relationship. Creative Commons makes its licenses and related
+information available on an "as-is" basis. Creative Commons gives no
+warranties regarding its licenses, any material licensed under their
+terms and conditions, or any related information. Creative Commons
+disclaims all liability for damages resulting from their use to the
+fullest extent possible.
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
+Using Creative Commons Public Licenses
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
+Creative Commons public licenses provide a standard set of terms and
+conditions that creators and other rights holders may use to share
+original works of authorship and other material subject to copyright
+and certain other rights specified in the public license below. The
+following considerations are for informational purposes only, are not
+exhaustive, and do not form part of our licenses.
+
+ Considerations for licensors: Our public licenses are
+ intended for use by those authorized to give the public
+ permission to use material in ways otherwise restricted by
+ copyright and certain other rights. Our licenses are
+ irrevocable. Licensors should read and understand the terms
+ and conditions of the license they choose before applying it.
+ Licensors should also secure all rights necessary before
+ applying our licenses so that the public can reuse the
+ material as expected. Licensors should clearly mark any
+ material not subject to the license. This includes other CC-
+ licensed material, or material used under an exception or
+ limitation to copyright. More considerations for licensors:
+ wiki.creativecommons.org/Considerations_for_licensors
+
+ Considerations for the public: By using one of our public
+ licenses, a licensor grants the public permission to use the
+ licensed material under specified terms and conditions. If
+ the licensor's permission is not necessary for any reason--for
+ example, because of any applicable exception or limitation to
+ copyright--then that use is not regulated by the license. Our
+ licenses grant only permissions under copyright and certain
+ other rights that a licensor has authority to grant. Use of
+ the licensed material may still be restricted for other
+ reasons, including because others have copyright or other
+ rights in the material. A licensor may make special requests,
+ such as asking that all changes be marked or described.
+ Although not required by our licenses, you are encouraged to
+ respect those requests where reasonable. More considerations
+ for the public:
+ wiki.creativecommons.org/Considerations_for_licensees
+
+=======================================================================
+
+Creative Commons Attribution-ShareAlike 4.0 International Public
+License
+
+By exercising the Licensed Rights (defined below), You accept and agree
+to be bound by the terms and conditions of this Creative Commons
+Attribution-ShareAlike 4.0 International Public License ("Public
+License"). To the extent this Public License may be interpreted as a
+contract, You are granted the Licensed Rights in consideration of Your
+acceptance of these terms and conditions, and the Licensor grants You
+such rights in consideration of benefits the Licensor receives from
+making the Licensed Material available under these terms and
+conditions.
+
+
+Section 1 -- Definitions.
+
+ a. Adapted Material means material subject to Copyright and Similar
+ Rights that is derived from or based upon the Licensed Material
+ and in which the Licensed Material is translated, altered,
+ arranged, transformed, or otherwise modified in a manner requiring
+ permission under the Copyright and Similar Rights held by the
+ Licensor. For purposes of this Public License, where the Licensed
+ Material is a musical work, performance, or sound recording,
+ Adapted Material is always produced where the Licensed Material is
+ synched in timed relation with a moving image.
+
+ b. Adapter's License means the license You apply to Your Copyright
+ and Similar Rights in Your contributions to Adapted Material in
+ accordance with the terms and conditions of this Public License.
+
+ c. BY-SA Compatible License means a license listed at
+ creativecommons.org/compatiblelicenses, approved by Creative
+ Commons as essentially the equivalent of this Public License.
+
+ d. Copyright and Similar Rights means copyright and/or similar rights
+ closely related to copyright including, without limitation,
+ performance, broadcast, sound recording, and Sui Generis Database
+ Rights, without regard to how the rights are labeled or
+ categorized. For purposes of this Public License, the rights
+ specified in Section 2(b)(1)-(2) are not Copyright and Similar
+ Rights.
+
+ e. Effective Technological Measures means those measures that, in the
+ absence of proper authority, may not be circumvented under laws
+ fulfilling obligations under Article 11 of the WIPO Copyright
+ Treaty adopted on December 20, 1996, and/or similar international
+ agreements.
+
+ f. Exceptions and Limitations means fair use, fair dealing, and/or
+ any other exception or limitation to Copyright and Similar Rights
+ that applies to Your use of the Licensed Material.
+
+ g. License Elements means the license attributes listed in the name
+ of a Creative Commons Public License. The License Elements of this
+ Public License are Attribution and ShareAlike.
+
+ h. Licensed Material means the artistic or literary work, database,
+ or other material to which the Licensor applied this Public
+ License.
+
+ i. Licensed Rights means the rights granted to You subject to the
+ terms and conditions of this Public License, which are limited to
+ all Copyright and Similar Rights that apply to Your use of the
+ Licensed Material and that the Licensor has authority to license.
+
+ j. Licensor means the individual(s) or entity(ies) granting rights
+ under this Public License.
+
+ k. Share means to provide material to the public by any means or
+ process that requires permission under the Licensed Rights, such
+ as reproduction, public display, public performance, distribution,
+ dissemination, communication, or importation, and to make material
+ available to the public including in ways that members of the
+ public may access the material from a place and at a time
+ individually chosen by them.
+
+ l. Sui Generis Database Rights means rights other than copyright
+ resulting from Directive 96/9/EC of the European Parliament and of
+ the Council of 11 March 1996 on the legal protection of databases,
+ as amended and/or succeeded, as well as other essentially
+ equivalent rights anywhere in the world.
+
+ m. You means the individual or entity exercising the Licensed Rights
+ under this Public License. Your has a corresponding meaning.
+
+
+Section 2 -- Scope.
+
+ a. License grant.
+
+ 1. Subject to the terms and conditions of this Public License,
+ the Licensor hereby grants You a worldwide, royalty-free,
+ non-sublicensable, non-exclusive, irrevocable license to
+ exercise the Licensed Rights in the Licensed Material to:
+
+ a. reproduce and Share the Licensed Material, in whole or
+ in part; and
+
+ b. produce, reproduce, and Share Adapted Material.
+
+ 2. Exceptions and Limitations. For the avoidance of doubt, where
+ Exceptions and Limitations apply to Your use, this Public
+ License does not apply, and You do not need to comply with
+ its terms and conditions.
+
+ 3. Term. The term of this Public License is specified in Section
+ 6(a).
+
+ 4. Media and formats; technical modifications allowed. The
+ Licensor authorizes You to exercise the Licensed Rights in
+ all media and formats whether now known or hereafter created,
+ and to make technical modifications necessary to do so. The
+ Licensor waives and/or agrees not to assert any right or
+ authority to forbid You from making technical modifications
+ necessary to exercise the Licensed Rights, including
+ technical modifications necessary to circumvent Effective
+ Technological Measures. For purposes of this Public License,
+ simply making modifications authorized by this Section 2(a)
+ (4) never produces Adapted Material.
+
+ 5. Downstream recipients.
+
+ a. Offer from the Licensor -- Licensed Material. Every
+ recipient of the Licensed Material automatically
+ receives an offer from the Licensor to exercise the
+ Licensed Rights under the terms and conditions of this
+ Public License.
+
+ b. Additional offer from the Licensor -- Adapted Material.
+ Every recipient of Adapted Material from You
+ automatically receives an offer from the Licensor to
+ exercise the Licensed Rights in the Adapted Material
+ under the conditions of the Adapter's License You apply.
+
+ c. No downstream restrictions. You may not offer or impose
+ any additional or different terms or conditions on, or
+ apply any Effective Technological Measures to, the
+ Licensed Material if doing so restricts exercise of the
+ Licensed Rights by any recipient of the Licensed
+ Material.
+
+ 6. No endorsement. Nothing in this Public License constitutes or
+ may be construed as permission to assert or imply that You
+ are, or that Your use of the Licensed Material is, connected
+ with, or sponsored, endorsed, or granted official status by,
+ the Licensor or others designated to receive attribution as
+ provided in Section 3(a)(1)(A)(i).
+
+ b. Other rights.
+
+ 1. Moral rights, such as the right of integrity, are not
+ licensed under this Public License, nor are publicity,
+ privacy, and/or other similar personality rights; however, to
+ the extent possible, the Licensor waives and/or agrees not to
+ assert any such rights held by the Licensor to the limited
+ extent necessary to allow You to exercise the Licensed
+ Rights, but not otherwise.
+
+ 2. Patent and trademark rights are not licensed under this
+ Public License.
+
+ 3. To the extent possible, the Licensor waives any right to
+ collect royalties from You for the exercise of the Licensed
+ Rights, whether directly or through a collecting society
+ under any voluntary or waivable statutory or compulsory
+ licensing scheme. In all other cases the Licensor expressly
+ reserves any right to collect such royalties.
+
+
+Section 3 -- License Conditions.
+
+Your exercise of the Licensed Rights is expressly made subject to the
+following conditions.
+
+ a. Attribution.
+
+ 1. If You Share the Licensed Material (including in modified
+ form), You must:
+
+ a. retain the following if it is supplied by the Licensor
+ with the Licensed Material:
+
+ i. identification of the creator(s) of the Licensed
+ Material and any others designated to receive
+ attribution, in any reasonable manner requested by
+ the Licensor (including by pseudonym if
+ designated);
+
+ ii. a copyright notice;
+
+ iii. a notice that refers to this Public License;
+
+ iv. a notice that refers to the disclaimer of
+ warranties;
+
+ v. a URI or hyperlink to the Licensed Material to the
+ extent reasonably practicable;
+
+ b. indicate if You modified the Licensed Material and
+ retain an indication of any previous modifications; and
+
+ c. indicate the Licensed Material is licensed under this
+ Public License, and include the text of, or the URI or
+ hyperlink to, this Public License.
+
+ 2. You may satisfy the conditions in Section 3(a)(1) in any
+ reasonable manner based on the medium, means, and context in
+ which You Share the Licensed Material. For example, it may be
+ reasonable to satisfy the conditions by providing a URI or
+ hyperlink to a resource that includes the required
+ information.
+
+ 3. If requested by the Licensor, You must remove any of the
+ information required by Section 3(a)(1)(A) to the extent
+ reasonably practicable.
+
+ b. ShareAlike.
+
+ In addition to the conditions in Section 3(a), if You Share
+ Adapted Material You produce, the following conditions also apply.
+
+ 1. The Adapter's License You apply must be a Creative Commons
+ license with the same License Elements, this version or
+ later, or a BY-SA Compatible License.
+
+ 2. You must include the text of, or the URI or hyperlink to, the
+ Adapter's License You apply. You may satisfy this condition
+ in any reasonable manner based on the medium, means, and
+ context in which You Share Adapted Material.
+
+ 3. You may not offer or impose any additional or different terms
+ or conditions on, or apply any Effective Technological
+ Measures to, Adapted Material that restrict exercise of the
+ rights granted under the Adapter's License You apply.
+
+
+Section 4 -- Sui Generis Database Rights.
+
+Where the Licensed Rights include Sui Generis Database Rights that
+apply to Your use of the Licensed Material:
+
+ a. for the avoidance of doubt, Section 2(a)(1) grants You the right
+ to extract, reuse, reproduce, and Share all or a substantial
+ portion of the contents of the database;
+
+ b. if You include all or a substantial portion of the database
+ contents in a database in which You have Sui Generis Database
+ Rights, then the database in which You have Sui Generis Database
+ Rights (but not its individual contents) is Adapted Material,
+
+ including for purposes of Section 3(b); and
+ c. You must comply with the conditions in Section 3(a) if You Share
+ all or a substantial portion of the contents of the database.
+
+For the avoidance of doubt, this Section 4 supplements and does not
+replace Your obligations under this Public License where the Licensed
+Rights include other Copyright and Similar Rights.
+
+
+Section 5 -- Disclaimer of Warranties and Limitation of Liability.
+
+ a. UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE
+ EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS
+ AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF
+ ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS,
+ IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION,
+ WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR
+ PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS,
+ ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT
+ KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT
+ ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+ b. TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE
+ TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION,
+ NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT,
+ INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES,
+ COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR
+ USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN
+ ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR
+ DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR
+ IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+ c. The disclaimer of warranties and limitation of liability provided
+ above shall be interpreted in a manner that, to the extent
+ possible, most closely approximates an absolute disclaimer and
+ waiver of all liability.
+
+
+Section 6 -- Term and Termination.
+
+ a. This Public License applies for the term of the Copyright and
+ Similar Rights licensed here. However, if You fail to comply with
+ this Public License, then Your rights under this Public License
+ terminate automatically.
+
+ b. Where Your right to use the Licensed Material has terminated under
+ Section 6(a), it reinstates:
+
+ 1. automatically as of the date the violation is cured, provided
+ it is cured within 30 days of Your discovery of the
+ violation; or
+
+ 2. upon express reinstatement by the Licensor.
+
+ For the avoidance of doubt, this Section 6(b) does not affect any
+ right the Licensor may have to seek remedies for Your violations
+ of this Public License.
+
+ c. For the avoidance of doubt, the Licensor may also offer the
+ Licensed Material under separate terms or conditions or stop
+ distributing the Licensed Material at any time; however, doing so
+ will not terminate this Public License.
+
+ d. Sections 1, 5, 6, 7, and 8 survive termination of this Public
+ License.
+
+
+Section 7 -- Other Terms and Conditions.
+
+ a. The Licensor shall not be bound by any additional or different
+ terms or conditions communicated by You unless expressly agreed.
+
+ b. Any arrangements, understandings, or agreements regarding the
+ Licensed Material not stated herein are separate from and
+ independent of the terms and conditions of this Public License.
+
+
+Section 8 -- Interpretation.
+
+ a. For the avoidance of doubt, this Public License does not, and
+ shall not be interpreted to, reduce, limit, restrict, or impose
+ conditions on any use of the Licensed Material that could lawfully
+ be made without permission under this Public License.
+
+ b. To the extent possible, if any provision of this Public License is
+ deemed unenforceable, it shall be automatically reformed to the
+ minimum extent necessary to make it enforceable. If the provision
+ cannot be reformed, it shall be severed from this Public License
+ without affecting the enforceability of the remaining terms and
+ conditions.
+
+ c. No term or condition of this Public License will be waived and no
+ failure to comply consented to unless expressly agreed to by the
+ Licensor.
+
+ d. Nothing in this Public License constitutes or may be interpreted
+ as a limitation upon, or waiver of, any privileges and immunities
+ that apply to the Licensor or You, including from the legal
+ processes of any jurisdiction or authority.
+
+
+=======================================================================
+
+Creative Commons is not a party to its public
+licenses. Notwithstanding, Creative Commons may elect to apply one of
+its public licenses to material it publishes and in those instances
+will be considered the “Licensor.” The text of the Creative Commons
+public licenses is dedicated to the public domain under the CC0 Public
+Domain Dedication. Except for the limited purpose of indicating that
+material is shared under a Creative Commons public license or as
+otherwise permitted by the Creative Commons policies published at
+creativecommons.org/policies, Creative Commons does not authorize the
+use of the trademark "Creative Commons" or any other trademark or logo
+of Creative Commons without its prior written consent including,
+without limitation, in connection with any unauthorized modifications
+to any of its public licenses or any other arrangements,
+understandings, or agreements concerning use of licensed material. For
+the avoidance of doubt, this paragraph does not form part of the
+public licenses.
+
+Creative Commons may be contacted at creativecommons.org.
diff --git a/README.md b/README.md
index 1703ebf..2c7b14f 100644
--- a/README.md
+++ b/README.md
@@ -1,64 +1,64 @@
-CAD files
-=========
+mkbd65 case
+===========
-To generate the CAD files for the mkbd65 run the following command:
-
-```
-./generate_scad.py
-```
+_The case for mkbd65 is still a work in progress!_
-Layout files
+Generate CAD files
+------------------
+
+1. Install dependencies
+ ```shell
+ pip3 install --user -r requirements.txt
+ ```
+2. Generate files for your phone for example the Oneplus 8T
+ ```shell
+ ./mkbd65.py --layout=ansi --3mf oneplus_8t.ini
+ ```
+
+Build instructions
+------------------
+
+### 3D printing
+
+Most of the case can be 3D printed using a home 3D printer, any online 3D printing service or at your local hack/make space. You can find your local hack/make space [here](https://wiki.hackerspaces.org/List_of_Hacker_Spaces).
+
+Print out these files with a sturdy filament like PLA:
+
+- `lower_case`
+
+Print out the `key_mat` with a flexible filament like [FilaFlexible40](https://fila-tech.store/product/filaflexible40).
+
+Config files
------------
-These files define the layoout that gets printed on the keymat. Currently the only file included is `layout_en_us.py`
-for an english US international layout. you can use that as a template for your layout.
+Properties for different phones are saved in INI files. Currently the only file included is `oneplus_8t.ini` for the
+Oneplus 8T phone. You can add your one phone by providing the INI file with measurements and a file describing it's camera bump.
-The file should define a single variable `LAYOUT` which is a list of roaws. These rows are also lists of columns. Each
-column has keys, which are a list of the strings that should be printed at different positions.
-
-Example for a one button keyboard with the labels `foo` in the top left corner and `bar` in the bottom left:
-
-```
-LAYOUT = [
- [
- ['foo', 'bar', '', '', ''],
- ],
-]
-```
-
-The label string will be used as `[TopLeft, BottomLeft, TopRight, BottomRight, Middle]`.
-
-Some strings need special escaping to be used in OpenScad later on. See the en_us layout for examples.
-
-
-Phone config
-------------
-
-Properties for different phones are saved in INI files. Currently the only file included is `oneplus5t.ini` for the
-Oneplus 5t phone with a english US international layout with the DejaVu Sans font.
-
-In the config file you can define phone specific aspects and style such as the used font and layout. Here is a list of
+In the config file you can define the phones size but also other aspects like the used font for the key mat. Here is a list of
the possile options:
-| Group | Option | Type | Default | Description |
-| ------ | --------- | ------ | ---------------------- | ----------------------------- |
-| keymap | thickness | Number | 0.5 | Thickness of the keymap in mm |
-| | layout | String | en_us-intl | Layout file used for labels |
-| key | thickness | Number | 1 | Thickness of the key in mm |
-| | font | String | DejaVu Sans:style=Bold | Font used for labels |
+| Group | Option | Type | Default | Description |
+| ------- | --------- | ------ | ---------------------- | ----------------------------- |
+| keymap | thickness | Number | 0.5 | Thickness of the keymap in mm |
+| key_mat | thickness | Number | 1 | Thickness of the key in mm |
+| | font | String | DejaVu Sans:style=Bold | Font used for labels |
-
-OpenScad files
+OpenSCAD files
--------------
-The generator script `generate_scad.py` creates multiple files.
+The generator script will create multiple files.
-| File | Material | Description |
-| --------------------- | -------- | --------------------------------------------------- |
-| mkbd65_keymat.scad | TPU | Keymat should be printed with a 3D printer |
-| mkbd65_pcb.scad | - | Just a spacer for the 3D model fitting |
-| mkbd65_top_plate.scad | Aluminum | Laser cut on a CNC |
-| mkbd65_internals.scad | ABS/PLA | Inner structure should be printed with a 3D printer |
-| mkbd65.scad | - | Combination of the above files |
+| File | Material | Description |
+| ---------------------- | -------- | -------------------------------------- |
+| mkbd65_key_mat.scad | TPU | 3D printable |
+| mkbd65_pcb.scad | - | Just a spacer for the 3D model fitting |
+| mkbd65_top_plate.scad | Acrylic | Laser cut on a CNC |
+| mkbd65_lower_case.scad | PLA | 3D printable |
+| mkbd65_internals.scad | PLA | 3D printable |
+| mkbd65.scad | - | Combination of the above files |
+---
+
+
+mkbd65 case by XenGi is licensed under CC BY-SA 4.0
diff --git a/generate_scad.py b/generate_scad.py
deleted file mode 100755
index 6057e47..0000000
--- a/generate_scad.py
+++ /dev/null
@@ -1,322 +0,0 @@
-#!/usr/bin/env python3
-
-"""
-mkbd65 openscad generator
-
-Usage:
- python3 generate_scad.py []
-
-Options:
- -h --help Show this screen.
-
-Example:
- python3 generate_scad.py oneplus5t.ini en_us-intl
-"""
-
-import sys
-from configparser import ConfigParser
-from importlib import import_module
-
-from solid import cube, text, union, difference, linear_extrude, scad_render_to_file, OpenSCADObject, translate, color, \
- polygon, circle
-from solid.utils import BlackPaint, White, Green, Aluminum, Cyan
-
-
-def roundrect(width, height, radius):
- """
- O/-----\O
- / \
- | |
- \ /
- O\_____/O
-
- :param width:
- :param height:
- :param radius:
- :return:
- """
- return union()(
- polygon([
- [0, radius],
- [0, height - radius],
- [radius, height],
- [width - radius, height],
- [width, height - radius],
- [width, radius],
- [width - radius, 0],
- [radius, 0]
- ]),
- translate([radius, radius, 0])(
- circle(r=radius)
- ),
- translate([radius, height - radius, 0])(
- circle(r=radius)
- ),
- translate([width - radius, height - radius, 0])(
- circle(r=radius)
- ),
- translate([width - radius, radius, 0])(
- circle(r=radius)
- )
- )
-
-
-def key(dx: int, dy: int, label_ltop: str = '', label_lbottom: str = '', label_rtop: str = '', label_rbottom: str = '',
- label_center: str = '') -> OpenSCADObject:
- """
- Generates a single key
-
- :param dx: width in mm
- :param dy: length in mm
- :param label: List of labels (top, bottom, right, middle)
- :return:
- """
- def get_size(s: str) -> float:
- if s in ['⇧', '⏎']:
- return 5
- elif s == '⌫':
- return 3.5
- elif s in ['Esc', 'Ctrl', 'Alt', 'Fn']:
- return 3
- else:
- return 4
-
- thickness = config.getfloat('key', 'thickness', fallback=1)
- font = config.get('key', 'font', fallback='DejaVu Sans:style=Bold')
-
- return difference()(
- linear_extrude(height=thickness)(
- roundrect(width=dx, height=dy, radius=0.5)
- ),
-
- translate(v=[1, 5.5, 0.8])(
- linear_extrude(height=0.2)(
- text(text=label_ltop, size=3, font=font, halign='left', valign='top')
- )
- ),
- translate(v=[1, 0.5, 0.8])(
- linear_extrude(height=0.2)(
- text(text=label_lbottom, size=3, font=font, halign='left', valign='bottom')
- )
- ),
- translate(v=[8.5, 5.5, 0.8])(
- linear_extrude(height=0.2)(
- text(text=label_rtop, size=3, font=font, halign='right', valign='top')
- )
- ),
- translate(v=[8.5, -1.5 if label_rbottom == '`' else 0.5, 0.8])(
- linear_extrude(height=0.2)(
- text(text=label_rbottom, size=3, font=font, halign='right', valign='bottom')
- )
- ),
- translate(v=[4.5, 3, 0.8])(
- linear_extrude(height=0.2)(
- text(text=label_center, size=get_size(label_center), font=font, halign='center', valign='center')
- )
- )
- )
-
-
-def keymat() -> OpenSCADObject:
- """
- Generates keymat
-
- mat:
- +---------------------------------------------+
- | margin |
- | +-----+ +-----+ +-----+ |
- |margin| |padding| | ... | |margin|
- | +-----+ +-----+ +-----+ |
- | padding |
- | +-----+ +-----+ +-----+ |
- | | | | | | | |
- | +-----+ +-----+ +-----+ |
- | ... |
- | +-----+ +-----+ +-----+ |
- | | | | | | | |
- | +-----+ +-----+ +-----+ |
- | margin |
- +---------------------------------------------+
- \ thickness
- key:
- +-----+
- | | dy
- +-----+
- dx \ thickness
-
- :return:
- """
- thickness = config.getfloat('keymat', 'thickness', fallback=0.5)
- cols = 12
- rows = 5
- key_dx = 9
- key_dy = 6
- padding = 1
- margin = 2
- spacebar_x = 5 # nth key from the left
- spacebar_length = 2 # length in keys
-
- keys = []
- for row in range(rows):
- for col in range(cols):
- keys.append(
- translate([
- col * padding + col * key_dx + margin,
- row * padding + row * key_dy + margin,
- thickness
- ])(
- key(
- dx=key_dx,
- dy=key_dy,
- label_ltop=layout[row][col][0],
- label_lbottom=layout[row][col][1],
- label_rtop=layout[row][col][2],
- label_rbottom=layout[row][col][3],
- label_center=layout[row][col][4]
- )
- )
- )
-
- return color(BlackPaint)(
- union()(
- # mat
- cube([
- cols * key_dx + (cols - 1) * padding + 2 * margin,
- rows * key_dy + (rows - 1) * padding + 2 * margin,
- thickness
- ]),
- # keys
- *keys,
- # spacebar
- translate([spacebar_x * key_dx + spacebar_x * padding + margin, margin, thickness])(
- key(dx=key_dx * spacebar_length + (spacebar_length - 1) * padding, dy=key_dy)
- )
- )
- )
-
-
-def pcb() -> OpenSCADObject:
- rows = 5
- columns = 12
- hspacing = 4
- vspacing = 3
- width = 6
- height = 4
- thickness = 0.78
- switches = []
-
- for row in range(rows):
- for col in range(columns):
- switches.append(
- translate([3.5 + (hspacing + width) * col, 2 + (vspacing + height) * row, 0.6])(
- color(White)(
- linear_extrude(height=thickness)(
- # 6 +----+ 5
- # / \
- # 7 + + 4 | 2mm
- # 8 + + 3 |
- # \ 4mm /
- # 1 +----+ 2
- polygon(points=[(1, 0), (5, 0), (6, 1), (6, 3), (5, 4), (1, 4), (0, 3), (0, 1)]),
- )
- )
- )
- )
-
- return union()(
- color(Green)(cube([123, 49, 0.6])),
- # ATMEGA32U4
- translate([13, 36, 0.6])(
- color(BlackPaint)(cube([7, 7, 1]))
- ),
- # Crystal
- translate([23, 35.75, 0.6])(
- color(BlackPaint)(cube([2.5, 2, 0.55]))
- ),
- *switches
- )
-
-
-def top_plate() -> OpenSCADObject:
- thickness = config.getfloat('keymat', 'thickness', fallback=1)
- w = config.getfloat('phone', 'width')
- h = config.getfloat('phone', 'height')
- r = config.getfloat('phone', 'cornerradius')
-
- return color(Aluminum)(
- difference()(
- #cube([123, 49, 0.5]),
- linear_extrude(height=thickness)(
- roundrect(width=w, height=h, radius=r)
- ),
- translate([0, 0, -1 * thickness])(keymat())
- )
- )
-
-
-def internals() -> OpenSCADObject:
- return color(Cyan)(cube([1, 1, 1]))
-
-
-def mkbd65() -> OpenSCADObject:
- fr4 = 0.4 # pcb thickness
- switch = 0.78 # switch height
- keymat_thickness = config.getfloat('keymat', 'thickness', fallback=1)
-
- return union()(
- internals(),
- pcb(),
- color(BlackPaint)(translate([0, -1, fr4 + switch])(keymat())),
- color(Aluminum)(translate([0, -1, fr4 + switch + keymat_thickness])(top_plate()))
- )
-
-
-if __name__ == '__main__':
- config = ConfigParser()
-
- if '-h' in sys.argv or '--help' in sys.argv or 2 > len(sys.argv) > 3:
- sys.exit(__doc__)
-
- if len(sys.argv) == 3:
- layoutfile = sys.argv[2]
- else:
- layoutfile = 'en_us-intl'
-
- try:
- with open(sys.argv[1]) as fd:
- config.read_file(fd)
- layout = import_module(f'layout_{ layoutfile }').LAYOUT
- file_header = '$fn = 16;'
- scad_render_to_file(
- keymat(),
- filepath='./mkbd65_keymat.scad',
- file_header=file_header,
- )
- # TODO: generate mkbd65_pcb.scad
- scad_render_to_file(
- pcb(),
- filepath='./mkbd65_pcb.scad',
- file_header=file_header,
- )
- # TODO: generate mkbd65_top_plate.scad
- scad_render_to_file(
- top_plate(),
- filepath='./mkbd65_top_plate.scad',
- file_header=file_header,
- )
- # TODO: generate mkbd65_internals.scad
- scad_render_to_file(
- internals(),
- filepath='./mkbd65_internals.scad',
- file_header=file_header,
- )
- # TODO: generate mkbd65.scad
- scad_render_to_file(
- mkbd65(),
- filepath='./mkbd65.scad',
- file_header=file_header,
- )
- except FileNotFoundError:
- sys.exit(f'The config file { sys.argv[1] } could not be found.')
- except ModuleNotFoundError:
- sys.exit(f'The layout file `layout_{ layoutfile }.py` could not be found.')
diff --git a/layout_en_us-intl.py b/layout_en_us-intl.py
deleted file mode 100644
index 56b120e..0000000
--- a/layout_en_us-intl.py
+++ /dev/null
@@ -1,81 +0,0 @@
-# [TopLeft, BottomLeft, TopRight, BottomRight, Middle]
-
-LAYOUT = [
- # row 4
- [
- ['', '', '', '', 'Ctrl'], # Left Control
- ['', '', '', '', 'Fn'], # Function
- ['', '', '', '', '⇧'], # Left Shift
- ['', '', '', '', 'Alt'], # Left Alt (Alt Gr)
- ['', '\\\\', '|', '', ''],
- ['', '', '', '', ''], # Spacebar (won't be visible)
- ['', '', '', '', ''], # Spacebar (won't be visible)
- ['', '-', '_', '', ''],
- ['', '=', '+', '', ''],
- ['', '', '', '', '◀'], # Arrow Left / Home
- ['', '', '', '', '▼'], # Arrow Down / Page Down
- ['', '', '', '', '▶'] # Arrow Right / End
- ],
- # row 3
- [
- ['', '', '', '', 'Z'],
- ['', '', '', '', 'X'],
- ['', '', '', '', 'C'],
- ['', '', '', '', 'V'],
- ['', '', '', '', 'B'],
- ['', '', '', '', 'N'],
- ['', '', '', '', 'M'],
- ['', ',', '<', '', ''],
- ['', '.', '>', '', ''],
- ['', '/', '?', '', ''],
- ['', '', '', '', '▲'], # Arrow Up / Page Up
- ['', '', '', '', '⇧'] # Right Shift
- ],
- # row 2
- [
- ['', '', '', '', 'A'],
- ['', '', '', '', 'S'],
- ['', '', '', '', 'D'],
- ['', '', '', '', 'F'],
- ['', '', '', '', 'G'],
- ['', '', '', '', 'H'],
- ['', '', '', '', 'J'],
- ['', '', '', '', 'K'],
- ['', '', '', '', 'L'],
- ['', ';', ':', '', ''],
- #['', '\'', '\\"', '`', ''],
- ['', '\'', '\\"', '`', ''],
- ['', '', '', '', '⏎'] # Return
- ],
- # row 1
- [
- ['', '', '', '', 'Q'],
- ['', '', '', '', 'W'],
- ['', '', '', '', 'E'],
- ['', '', '', '', 'R'],
- ['', '', '', '', 'T'],
- ['', '', '', '', 'Y'],
- ['', '', '', '', 'U'],
- ['', '', '', '', 'I'],
- ['', '', '', '', 'O'],
- ['', '', '', '', 'P'],
- ['', '[', '{', '', ''],
- ['', ']', '}', '', '']
- ],
- # row 0
- [
- ['','','','','Esc'],
- ['', '1', '!', '', ''],
- ['', '2', '@', '', ''],
- ['', '3', '#', '', ''],
- ['', '4', '$', '', ''],
- #['', '5', '%', '€', ''],
- ['', '5', '%', '', ''],
- ['', '6', '^', '', ''],
- ['', '7', '&', '', ''],
- ['', '8', '*', '', ''],
- ['', '9', '(', '', ''],
- ['', '0', ')', '', ''],
- ['', '', '', '', '⌫'] # Backspace
- ]
-]
diff --git a/oneplus5t.ini b/oneplus5t.ini
deleted file mode 100644
index a6d9927..0000000
--- a/oneplus5t.ini
+++ /dev/null
@@ -1,14 +0,0 @@
-; mkbd65 config for OnePlus 5t
-
-[keymat]
-thickness = 0.5
-layout = en_us-intl
-
-[key]
-thickness = 1
-font = DejaVu Sans:style=Bold
-
-[phone]
-width = 156
-height = 75
-cornerradius = 10
\ No newline at end of file