Add support for Meira

This commit is contained in:
Cole Markham 2017-11-17 12:01:21 -06:00 • committed by Jack Humbert
commit a9a46adba0
23 changed files with 2186 additions and 0 deletions

287
keyboards/meira/TWIlib.c Executable file
View file

@ -0,0 +1,287 @@
/*
* TWIlib.c
*
* Created: 6/01/2014 10:41:33 PM
* Author: Chris Herring
*/
#include <avr/io.h>
#include <avr/interrupt.h>
#include "TWIlib.h"
#include "util/delay.h"
#include "print.h"
void TWIInit()
{
TWIInfo.mode = Ready;
TWIInfo.errorCode = 0xFF;
TWIInfo.repStart = 0;
// Set pre-scalers (no pre-scaling)
TWSR = 0;
// Set bit rate
TWBR = ((F_CPU / TWI_FREQ) - 16) / 2;
// Enable TWI and interrupt
TWCR = (1 << TWIE) | (1 << TWEN);
}
uint8_t isTWIReady()
{
if ( (TWIInfo.mode == Ready) | (TWIInfo.mode == RepeatedStartSent) )
{
// xprintf("i2c ready\n");
return 1;
}
else
{
if(TWIInfo.mode == Initializing){
switch(TWIInfo.errorCode){
case TWI_SUCCESS:
break;
case TWI_NO_RELEVANT_INFO:
break;
case TWI_LOST_ARBIT:
case TWI_MT_DATA_NACK:
// Some kind of I2C error, reset and re-init
xprintf("I2C init error: %d\n", TWIInfo.errorCode);
TWCR = (1 << TWINT)|(1 << TWSTO);
TWIInit();
break;
default:
xprintf("Other i2c init error: %d\n", TWIInfo.errorCode);
}
}
return 0;
}
}
void TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart, uint8_t blocking)
{
// Wait until ready
while (!isTWIReady()) {_delay_us(1);}
// Reset the I2C stuff
TWCR = (1 << TWINT)|(1 << TWSTO);
TWIInit();
// Set repeated start mode
TWIInfo.repStart = repStart;
// Copy transmit info to global variables
TWITransmitBuffer = (uint8_t *)TXdata;
TXBuffLen = dataLen;
TXBuffIndex = 0;
// If a repeated start has been sent, then devices are already listening for an address
// and another start does not need to be sent.
if (TWIInfo.mode == RepeatedStartSent)
{
TWIInfo.mode = Initializing;
TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer
TWISendTransmit(); // Send the data
}
else // Otherwise, just send the normal start signal to begin transmission.
{
TWIInfo.mode = Initializing;
TWISendStart();
}
if(blocking){
// Wait until ready
while (!isTWIReady()){_delay_us(1);}
}
}
// uint8_t TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart)
// {
// if (dataLen <= TXMAXBUFLEN)
// {
// // Wait until ready
// while (!isTWIReady()) {_delay_us(1);}
// // Set repeated start mode
// TWIInfo.repStart = repStart;
// // Copy data into the transmit buffer
// uint8_t *data = (uint8_t *)TXdata;
// for (int i = 0; i < dataLen; i++)
// {
// TWITransmitBuffer[i] = data[i];
// }
// // Copy transmit info to global variables
// TXBuffLen = dataLen;
// TXBuffIndex = 0;
// // If a repeated start has been sent, then devices are already listening for an address
// // and another start does not need to be sent.
// if (TWIInfo.mode == RepeatedStartSent)
// {
// TWIInfo.mode = Initializing;
// TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer
// TWISendTransmit(); // Send the data
// }
// else // Otherwise, just send the normal start signal to begin transmission.
// {
// TWIInfo.mode = Initializing;
// TWISendStart();
// }
// }
// else
// {
// return 1; // return an error if data length is longer than buffer
// }
// return 0;
// }
uint8_t TWIReadData(uint8_t TWIaddr, uint8_t bytesToRead, uint8_t repStart)
{
// Check if number of bytes to read can fit in the RXbuffer
if (bytesToRead < RXMAXBUFLEN)
{
// Reset buffer index and set RXBuffLen to the number of bytes to read
RXBuffIndex = 0;
RXBuffLen = bytesToRead;
// Create the one value array for the address to be transmitted
uint8_t TXdata[1];
// Shift the address and AND a 1 into the read write bit (set to write mode)
TXdata[0] = (TWIaddr << 1) | 0x01;
// Use the TWITransmitData function to initialize the transfer and address the slave
TWITransmitData(TXdata, 1, repStart, 0);
}
else
{
return 0;
}
return 1;
}
ISR (TWI_vect)
{
switch (TWI_STATUS)
{
// ----\/ ---- MASTER TRANSMITTER OR WRITING ADDRESS ----\/ ---- //
case TWI_MT_SLAW_ACK: // SLA+W transmitted and ACK received
// Set mode to Master Transmitter
TWIInfo.mode = MasterTransmitter;
case TWI_START_SENT: // Start condition has been transmitted
case TWI_MT_DATA_ACK: // Data byte has been transmitted, ACK received
if (TXBuffIndex < TXBuffLen) // If there is more data to send
{
TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
TWISendTransmit(); // Send the data
}
// This transmission is complete however do not release bus yet
else if (TWIInfo.repStart)
{
TWIInfo.errorCode = 0xFF;
TWISendStart();
}
// All transmissions are complete, exit
else
{
TWIInfo.mode = Ready;
TWIInfo.errorCode = 0xFF;
TWISendStop();
}
break;
// ----\/ ---- MASTER RECEIVER ----\/ ---- //
case TWI_MR_SLAR_ACK: // SLA+R has been transmitted, ACK has been received
// Switch to Master Receiver mode
TWIInfo.mode = MasterReceiver;
// If there is more than one byte to be read, receive data byte and return an ACK
if (RXBuffIndex < RXBuffLen-1)
{
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
TWISendACK();
}
// Otherwise when a data byte (the only data byte) is received, return NACK
else
{
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
TWISendNACK();
}
break;
case TWI_MR_DATA_ACK: // Data has been received, ACK has been transmitted.
/// -- HANDLE DATA BYTE --- ///
TWIReceiveBuffer[RXBuffIndex++] = TWDR;
// If there is more than one byte to be read, receive data byte and return an ACK
if (RXBuffIndex < RXBuffLen-1)
{
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
TWISendACK();
}
// Otherwise when a data byte (the only data byte) is received, return NACK
else
{
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
TWISendNACK();
}
break;
case TWI_MR_DATA_NACK: // Data byte has been received, NACK has been transmitted. End of transmission.
/// -- HANDLE DATA BYTE --- ///
TWIReceiveBuffer[RXBuffIndex++] = TWDR;
// This transmission is complete however do not release bus yet
if (TWIInfo.repStart)
{
TWIInfo.errorCode = 0xFF;
TWISendStart();
}
// All transmissions are complete, exit
else
{
TWIInfo.mode = Ready;
TWIInfo.errorCode = 0xFF;
TWISendStop();
}
break;
// ----\/ ---- MT and MR common ----\/ ---- //
case TWI_MR_SLAR_NACK: // SLA+R transmitted, NACK received
case TWI_MT_SLAW_NACK: // SLA+W transmitted, NACK received
case TWI_MT_DATA_NACK: // Data byte has been transmitted, NACK received
case TWI_LOST_ARBIT: // Arbitration has been lost
// Return error and send stop and set mode to ready
if (TWIInfo.repStart)
{
TWIInfo.errorCode = TWI_STATUS;
TWISendStart();
}
// All transmissions are complete, exit
else
{
TWIInfo.mode = Ready;
TWIInfo.errorCode = TWI_STATUS;
TWISendStop();
}
break;
case TWI_REP_START_SENT: // Repeated start has been transmitted
// Set the mode but DO NOT clear TWINT as the next data is not yet ready
TWIInfo.mode = RepeatedStartSent;
break;
// ----\/ ---- SLAVE RECEIVER ----\/ ---- //
// TODO IMPLEMENT SLAVE RECEIVER FUNCTIONALITY
// ----\/ ---- SLAVE TRANSMITTER ----\/ ---- //
// TODO IMPLEMENT SLAVE TRANSMITTER FUNCTIONALITY
// ----\/ ---- MISCELLANEOUS STATES ----\/ ---- //
case TWI_NO_RELEVANT_INFO: // It is not really possible to get into this ISR on this condition
// Rather, it is there to be manually set between operations
break;
case TWI_ILLEGAL_START_STOP: // Illegal START/STOP, abort and return error
TWIInfo.errorCode = TWI_ILLEGAL_START_STOP;
TWIInfo.mode = Ready;
TWISendStop();
break;
}
}

81
keyboards/meira/TWIlib.h Executable file
View file

@ -0,0 +1,81 @@
/*
* TWIlib.h
*
* Created: 6/01/2014 10:38:42 PM
* Author: Chris Herring
*/
#ifndef TWILIB_H_
#define TWILIB_H_
// TWI bit rate
#define TWI_FREQ 400000
// Get TWI status
#define TWI_STATUS (TWSR & 0xF8)
// Transmit buffer length
#define TXMAXBUFLEN 20
// Receive buffer length
#define RXMAXBUFLEN 20
// Global transmit buffer
volatile uint8_t *TWITransmitBuffer;
// Global receive buffer
volatile uint8_t TWIReceiveBuffer[RXMAXBUFLEN];
// Buffer indexes
volatile int TXBuffIndex; // Index of the transmit buffer. Is volatile, can change at any time.
int RXBuffIndex; // Current index in the receive buffer
// Buffer lengths
int TXBuffLen; // The total length of the transmit buffer
int RXBuffLen; // The total number of bytes to read (should be less than RXMAXBUFFLEN)
typedef enum {
Ready,
Initializing,
RepeatedStartSent,
MasterTransmitter,
MasterReceiver,
SlaceTransmitter,
SlaveReciever
} TWIMode;
typedef struct TWIInfoStruct{
TWIMode mode;
uint8_t errorCode;
uint8_t repStart;
}TWIInfoStruct;
TWIInfoStruct TWIInfo;
// TWI Status Codes
#define TWI_START_SENT 0x08 // Start sent
#define TWI_REP_START_SENT 0x10 // Repeated Start sent
// Master Transmitter Mode
#define TWI_MT_SLAW_ACK 0x18 // SLA+W sent and ACK received
#define TWI_MT_SLAW_NACK 0x20 // SLA+W sent and NACK received
#define TWI_MT_DATA_ACK 0x28 // DATA sent and ACK received
#define TWI_MT_DATA_NACK 0x30 // DATA sent and NACK received
// Master Receiver Mode
#define TWI_MR_SLAR_ACK 0x40 // SLA+R sent, ACK received
#define TWI_MR_SLAR_NACK 0x48 // SLA+R sent, NACK received
#define TWI_MR_DATA_ACK 0x50 // Data received, ACK returned
#define TWI_MR_DATA_NACK 0x58 // Data received, NACK returned
// Miscellaneous States
#define TWI_LOST_ARBIT 0x38 // Arbitration has been lost
#define TWI_NO_RELEVANT_INFO 0xF8 // No relevant information available
#define TWI_ILLEGAL_START_STOP 0x00 // Illegal START or STOP condition has been detected
#define TWI_SUCCESS 0xFF // Successful transfer, this state is impossible from TWSR as bit2 is 0 and read only
#define TWISendStart() (TWCR = (1<<TWINT)|(1<<TWSTA)|(1<<TWEN)|(1<<TWIE)) // Send the START signal, enable interrupts and TWI, clear TWINT flag to resume transfer.
#define TWISendStop() (TWCR = (1<<TWINT)|(1<<TWSTO)|(1<<TWEN)|(1<<TWIE)) // Send the STOP signal, enable interrupts and TWI, clear TWINT flag.
#define TWISendTransmit() (TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)) // Used to resume a transfer, clear TWINT and ensure that TWI and interrupts are enabled.
#define TWISendACK() (TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)|(1<<TWEA)) // FOR MR mode. Resume a transfer, ensure that TWI and interrupts are enabled and respond with an ACK if the device is addressed as a slave or after it receives a byte.
#define TWISendNACK() (TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)) // FOR MR mode. Resume a transfer, ensure that TWI and interrupts are enabled but DO NOT respond with an ACK if the device is addressed as a slave or after it receives a byte.
// Function declarations
void TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart, uint8_t blocking);
void TWIInit(void);
uint8_t TWIReadData(uint8_t TWIaddr, uint8_t bytesToRead, uint8_t repStart);
uint8_t isTWIReady(void);
#endif // TWICOMMS_H_

53
keyboards/meira/config.h Normal file
View file

@ -0,0 +1,53 @@
/*
Copyright 2017 Cole Markham
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6061
#define DEVICE_VER 0x0001
#define MANUFACTURER WoodKeys.click
#define PRODUCT Meira
#define DESCRIPTION Low-profile Ortholinear Compact keyboard
/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 12
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
#define DIODE_DIRECTION CUSTOM_MATRIX
#define BACKLIGHT_LEVELS 10
#define BACKLIGHT_PWM_MAP {2, 4, 8, 16, 40, 55, 70, 128, 200, 255}
#define BACKLIGHT_BREATHING
#define RGB_DI_PIN D3
#define RGBLIGHT_TIMER
#define RGBLED_NUM 15 // Number of LEDs
#ifdef SUBPROJECT_promicro
#include "promicro/config.h"
#endif
#ifdef SUBPROJECT_featherble
#include "featherble/config.h"
#endif
#endif

View file

@ -0,0 +1,175 @@
/*
Copyright 2017 REPLACE_WITH_YOUR_NAME
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef FEATHERBLECONFIG_H
#define FEATHERBLECONFIG_H
#include "config_common.h"
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { F7, F6, F5, F4 }
// Column pins to demux in LSB order
#define MATRIX_COL_PINS { C7, B7, B6, C6 }
#define LED_EN_PIN D2
#define UNUSED_PINS
#define CATERINA_BOOTLOADER
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
//#define BACKLIGHT_LEVELS 3
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/*
* MIDI options
*/
/* Prevent use of disabled MIDI features in the keymap */
//#define MIDI_ENABLE_STRICT 1
/* enable basic MIDI features:
- MIDI notes can be sent when in Music mode is on
*/
//#define MIDI_BASIC
/* enable advanced MIDI features:
- MIDI notes can be added to the keymap
- Octave shift and transpose
- Virtual sustain, portamento, and modulation wheel
- etc.
*/
//#define MIDI_ADVANCED
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
#endif

View file

@ -0,0 +1 @@
#include "meira.h"

View file

@ -0,0 +1,9 @@
#ifndef FEATHERBLE_H
#define FEATHERBLE_H
#include "../meira.h"
#include "quantum.h"
#endif

View file

@ -0,0 +1,4 @@
BLUETOOTH_ENABLE = yes
BACKLIGHT_ENABLE = yes
F_CPU = 8000000

286
keyboards/meira/issi.c Executable file
View file

@ -0,0 +1,286 @@
#ifdef ISSI_ENABLE
#include <stdlib.h>
#include <stdint.h>
#include <util/delay.h>
#include <avr/sfr_defs.h>
#include <avr/io.h>
#include <util/twi.h>
#include "issi.h"
#include "print.h"
#include "TWIlib.h"
#define ISSI_ADDR_DEFAULT 0xE8
#define ISSI_REG_CONFIG 0x00
#define ISSI_REG_CONFIG_PICTUREMODE 0x00
#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
#define ISSI_CONF_PICTUREMODE 0x00
#define ISSI_CONF_AUTOFRAMEMODE 0x04
#define ISSI_CONF_AUDIOMODE 0x08
#define ISSI_REG_PICTUREFRAME 0x01
#define ISSI_REG_SHUTDOWN 0x0A
#define ISSI_REG_AUDIOSYNC 0x06
#define ISSI_COMMANDREGISTER 0xFD
#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
uint8_t control[8][9] = {
{0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0},
};
ISSIDeviceStruct *issi_devices[4] = {0, 0, 0, 0};
#ifndef cbi
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
#endif
#ifndef sbi
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
#endif
#define I2C_WRITE 0
#define F_SCL 400000UL // SCL frequency
#define Prescaler 1
#define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16 ) / 2)
uint8_t i2c_start(uint8_t address)
{
// reset TWI control register
TWCR = 0;
// transmit START condition
TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
// wait for end of transmission
while( !(TWCR & (1<<TWINT)) );
// check if the start condition was successfully transmitted
if((TWSR & 0xF8) != TW_START){ return 1; }
// load slave address into data register
TWDR = address;
// start transmission of address
TWCR = (1<<TWINT) | (1<<TWEN);
// wait for end of transmission
while( !(TWCR & (1<<TWINT)) );
// check if the device has acknowledged the READ / WRITE mode
uint8_t twst = TW_STATUS & 0xF8;
if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return 1;
return 0;
}
uint8_t i2c_write(uint8_t data)
{
// load data into data register
TWDR = data;
// start transmission of data
TWCR = (1 << TWINT) | (1 << TWEN);
// wait for end of transmission
while (!(TWCR & (1 << TWINT)))
;
if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
return 1;
}
return 0;
}
uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length)
{
TWBR = (uint8_t)TWBR_val;
if (i2c_start(address | I2C_WRITE))
return 1;
for (uint16_t i = 0; i < length; i++) {
if (i2c_write(data[i]))
return 1;
}
// transmit STOP condition
TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWSTO);
return 0;
}
void setFrame(uint8_t device, uint8_t frame)
{
static uint8_t current_frame = -1;
if(current_frame != frame){
uint8_t payload[] = {
ISSI_ADDR_DEFAULT | device << 1,
ISSI_COMMANDREGISTER,
frame
};
TWITransmitData(payload, sizeof(payload), 0, 1);
}
// static uint8_t current_frame = 0xFF;
// if(current_frame == frame){
// // return;
// }
// uint8_t payload[2] = { ISSI_COMMANDREGISTER, frame };
// i2c_transmit(ISSI_ADDR_DEFAULT | device << 1, payload, 2);
// current_frame = frame;
}
void writeRegister8(uint8_t device, uint8_t frame, uint8_t reg, uint8_t data)
{
// Set the frame
setFrame(device, frame);
// Write to the register
uint8_t payload[] = {
ISSI_ADDR_DEFAULT | device << 1,
reg,
data
};
TWITransmitData(payload, sizeof(payload), 0, 1);
}
// void activateLED(uint8_t matrix, uint8_t cx, uint8_t cy, uint8_t pwm)
// {
// xprintf("activeLED: %02X %02X %02X %02X\n", matrix, cy, cx, pwm);
// uint8_t x = cx - 1; // funciton takes 1 based counts, but we need 0...
// uint8_t y = cy - 1; // creating them once for less confusion
// if(pwm == 0){
// cbi(control[matrix][y], x);
// }else{
// sbi(control[matrix][y], x);
// }
// uint8_t device = (matrix & 0x06) >> 1;
// uint8_t control_reg = (y << 1) | (matrix & 0x01);
// uint8_t pwm_reg = 0;
// switch(matrix & 0x01){
// case 0:
// pwm_reg = 0x24;
// break;
// case 1:
// pwm_reg = 0x2C;
// break;
// }
// pwm_reg += (y << 4) + x;
// xprintf(" device: %02X\n", device);
// xprintf(" control: %02X %02X\n", control_reg, control[matrix][y]);
// xprintf(" pwm: %02X %02X\n", pwm_reg, pwm);
// writeRegister8(device, 0, control_reg, control[matrix][y]);
// writeRegister8(device, 0, control_reg + 0x12, control[matrix][y]);
// writeRegister8(device, 0, pwm_reg, pwm);
// }
void activateLED(uint8_t matrix, uint8_t cx, uint8_t cy, uint8_t pwm)
{
uint8_t device_addr = (matrix & 0x06) >> 1;
ISSIDeviceStruct *device = issi_devices[device_addr];
if(device == 0){
return;
}
// xprintf("activeLED: %02X %02X %02X %02X\n", matrix, cy, cx, pwm);
uint8_t x = cx - 1; // funciton takes 1 based counts, but we need 0...
uint8_t y = cy - 1; // creating them once for less confusion
uint8_t control_reg = (y << 1) | (matrix & 0x01);
if(pwm == 0){
cbi(device->led_ctrl[control_reg], x);
cbi(device->led_blink_ctrl[control_reg], x);
}else{
sbi(device->led_ctrl[control_reg], x);
sbi(device->led_blink_ctrl[control_reg], x);
}
uint8_t pwm_reg = 0;
switch(matrix & 0x01){
case 0:
pwm_reg = 0x00;
break;
case 1:
pwm_reg = 0x08;
break;
}
pwm_reg += (y << 4) + x;
// xprintf(" device_addr: %02X\n", device_addr);
// xprintf(" control: %02X %02X\n", control_reg, control[matrix][y]);
// xprintf(" pwm: %02X %02X\n", pwm_reg, pwm);
// writeRegister8(device_addr, 0, control_reg, control[matrix][y]);
device->led_pwm[pwm_reg] = pwm;
device->led_dirty = 1;
// writeRegister8(device_addr, 0, control_reg + 0x12, control[matrix][y]);
// writeRegister8(device_addr, 0, pwm_reg, pwm);
}
void update_issi(uint8_t device_addr, uint8_t blocking)
{
// This seems to take about 6ms
ISSIDeviceStruct *device = issi_devices[device_addr];
if(device != 0){
if(device->fn_dirty){
device->fn_dirty = 0;
setFrame(device_addr, ISSI_BANK_FUNCTIONREG);
TWITransmitData(&device->fn_device_addr, sizeof(device->fn_registers) + 2, 0, 1);
}
if(device->led_dirty){
device->led_dirty = 0;
setFrame(device_addr, 0);
TWITransmitData(&device->led_device_addr, 0xB6, 0, blocking);
}
}
}
void issi_init(void)
{
// Set LED_EN/SDB high to enable the chip
xprintf("Enabing SDB on pin: %d\n", LED_EN_PIN);
_SFR_IO8((LED_EN_PIN >> 4) + 1) &= ~_BV(LED_EN_PIN & 0xF); // IN
_SFR_IO8((LED_EN_PIN >> 4) + 2) |= _BV(LED_EN_PIN & 0xF); // HI
TWIInit();
for(uint8_t device_addr = 0; device_addr < 4; device_addr++){
xprintf("ISSI Init device: %d\n", device_addr);
// If this device has been previously allocated, free it
if(issi_devices[device_addr] != 0){
free(issi_devices[device_addr]);
}
// Try to shutdown the device, if this fails skip this device
writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x00);
while (!isTWIReady()){_delay_us(1);}
if(TWIInfo.errorCode != 0xFF){
xprintf("ISSI init failed %d %02X %02X\n", device_addr, TWIInfo.mode, TWIInfo.errorCode);
continue;
}
// Allocate the device structure - calloc zeros it for us
ISSIDeviceStruct *device = (ISSIDeviceStruct *)calloc(sizeof(ISSIDeviceStruct) * 2, 1);
issi_devices[device_addr] = device;
device->fn_device_addr = ISSI_ADDR_DEFAULT | device_addr << 1;
device->fn_register_addr = 0;
device->led_device_addr = ISSI_ADDR_DEFAULT | device_addr << 1;
device->led_register_addr = 0;
// set dirty bits so that all of the buffered data is written out
device->fn_dirty = 1;
device->led_dirty = 1;
update_issi(device_addr, 1);
// Set the function register to picture mode
// device->fn_reg[ISSI_REG_CONFIG] = ISSI_REG_CONFIG_PICTUREMODE;
writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x01);
}
// Shutdown and set all registers to 0
// writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x00);
// for(uint8_t bank = 0; bank <= 7; bank++){
// for (uint8_t reg = 0x00; reg <= 0xB3; reg++) {
// writeRegister8(device_addr, bank, reg, 0x00);
// }
// }
// for (uint8_t reg = 0; reg <= 0x0C; reg++) {
// writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, reg, 0x00);
// }
// writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE);
// writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x01);
// picture mode
// writeRegister8(ISSI_BANK_FUNCTIONREG, 0x01, 0x01);
//Enable blink
// writeRegister8(ISSI_BANK_FUNCTIONREG, 0x05, 0x48B);
//Enable Breath
}
#endif

40
keyboards/meira/issi.h Executable file
View file

@ -0,0 +1,40 @@
#ifdef ISSI_ENABLE
#ifndef ISSI_H
#define ISSI_H
typedef struct ISSIDeviceStruct{
uint8_t fn_dirty; // function registers need to be resent
uint8_t fn_device_addr;
uint8_t fn_register_addr;
uint8_t fn_registers[13];
uint8_t led_dirty; // LED data has changed and needs to be resent
uint8_t led_device_addr;
uint8_t led_register_addr;
uint8_t led_ctrl[18];
uint8_t led_blink_ctrl[18];
uint8_t led_pwm[144];
}ISSIDeviceStruct;
extern ISSIDeviceStruct *issi_devices[];
// Low level commands- 'device' is the 2-bit i2c id.
void issi_init(void);
void set_shutdown(uint8_t device, uint8_t shutdown);
void writeRegister8(uint8_t device, uint8_t frame, uint8_t reg, uint8_t data);
// Higher level, no device is given, but it is calculated from 'matrix'
// Each device has 2 blocks, max of 4 devices:
// Device | Block = Matrix
// 0 A 0
// 0 B 1
// 1 A 2
// 1 B 3
// 2 A 4
// 2 B 5
// 3 A 6
// 3 B 7
void activateLED(uint8_t matrix, uint8_t cx, uint8_t cy, uint8_t pwm);
void update_issi(uint8_t device_addr, uint8_t blocking);
#endif
#endif

View file

@ -0,0 +1,24 @@
/* Copyright 2017 REPLACE_WITH_YOUR_NAME
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
// place overrides here
#endif

View file

@ -0,0 +1,320 @@
/* Copyright 2017 Cole Markham
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "meira.h"
#include "issi.h"
#include "lighting.h"
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
#define _QWERTY 0
#define _COLEMAK 1
#define _DVORAK 2
#define _LOWER 3
#define _RAISE 4
#define _ADJUST 16
enum custom_keycodes {
QWERTY = SAFE_RANGE,
COLEMAK,
DVORAK,
LOWER,
RAISE,
ADJUST,
};
// define variables for reactive RGB
bool TOG_STATUS = false;
int RGB_current_mode;
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
* ,-----------------------------------------------------------------------------------.
* | Esc | Q | W | E | R | T | Y | U | I | O | P | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Tab | A | S | D | F | G | H | J | K | L | ; | ' |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* |Adjust| Ctrl | Ctrl | Alt |Lower | Cmd |Space |Raise | Left | Down | Up |Right |
* `-----------------------------------------------------------------------------------'
*/
[_QWERTY] = KEYMAP( \
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \
ADJUST, KC_LCTL, KC_LALT, KC_LALT, LOWER, KC_LGUI, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Colemak
* ,-----------------------------------------------------------------------------------.
* | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Esc | A | R | S | T | D | H | N | E | I | O | " |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | K | M | , | . | / |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
* `-----------------------------------------------------------------------------------'
*/
[_COLEMAK] = KEYMAP( \
KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \
KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Dvorak
* ,-----------------------------------------------------------------------------------.
* | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Esc | A | O | E | U | I | D | H | T | N | S | / |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
* `-----------------------------------------------------------------------------------'
*/
[_DVORAK] = KEYMAP( \
KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \
KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \
ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Lower
* ,-----------------------------------------------------------------------------------.
* | | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | ~ | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------'
*/
[_LOWER] = KEYMAP( \
_______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \
KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, KC_QUOT, \
_______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END \
),
/* Raise
* ,-----------------------------------------------------------------------------------.
* | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | ` | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Home | PgUp | PgDn | End |
* `-----------------------------------------------------------------------------------'
*/
[_RAISE] = KEYMAP( \
_______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END \
),
/* Adjust (Lower + Raise)
* ,-----------------------------------------------------------------------------------.
* | | Reset| | | | | | | | | | Del |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_ADJUST] = KEYMAP( \
BL_TOGG, RESET, _______, KC_MRWD, KC_MPLY, KC_MFFD, KC_PSCR, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_DEL, \
BL_STEP, RGB_MOD, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, KC_PSCR, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
)
};
const uint16_t PROGMEM fn_actions[] = {
};
// Setting ADJUST layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
#ifdef RGBLIGHT_ENABLE
rgblight_mode(RGB_current_mode);
#endif
layer_on(layer3);
} else {
layer_off(layer3);
}
}
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
if (record->event.pressed) {
register_code(KC_RSFT);
} else {
unregister_code(KC_RSFT);
}
break;
}
return MACRO_NONE;
};
void matrix_init_user(void) {
}
void matrix_scan_user(void) {
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
#endif
// persistent_default_layer_set(1UL<<_QWERTY);
}
return false;
break;
case COLEMAK:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_colemak, false, 0);
#endif
// persistent_default_layer_set(1UL<<_COLEMAK);
}
return false;
break;
case DVORAK:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
#endif
// persistent_default_layer_set(1UL<<_DVORAK);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
//not sure how to have keyboard check mode and set it to a variable, so my work around
//uses another variable that would be set to true after the first time a reactive key is pressed.
if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
} else {
TOG_STATUS = !TOG_STATUS;
#ifdef RGBLIGHT_ENABLE
rgblight_mode(16);
#endif
}
layer_on(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
#ifdef RGBLIGHT_ENABLE
rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change
#endif
TOG_STATUS = false;
layer_off(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
//not sure how to have keyboard check mode and set it to a variable, so my work around
//uses another variable that would be set to true after the first time a reactive key is pressed.
if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
} else {
TOG_STATUS = !TOG_STATUS;
#ifdef RGBLIGHT_ENABLE
rgblight_mode(15);
#endif
}
layer_on(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
#ifdef RGBLIGHT_ENABLE
rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change
#endif
layer_off(_RAISE);
TOG_STATUS = false;
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
// FIXME add RGB feedback
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
case BL_TOGG:
#ifdef ISSI_ENABLE
if (record->event.pressed) {
print("Enabling backlight\n");
issi_init();
}
#endif
return false;
break;
case BL_STEP:
if (record->event.pressed) {
print("Stepping backlight\n");
#ifdef BACKLIGHT_ENABLE
print("Really stepping backlight\n");
backlight_step();
#endif
}
return false;
break;
//led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
#ifdef RGBLIGHT_ENABLE
case RGB_MOD:
if (record->event.pressed) {
rgblight_mode(RGB_current_mode);
rgblight_step();
RGB_current_mode = rgblight_config.mode;
}
return false;
break;
#endif
// case BL_INC:
// meira_inc_backlight_level();
// return false;
// break;
}
return true;
}
void led_set_user(uint8_t usb_led) {
}

View file

@ -0,0 +1 @@
# The default keymap for meira

95
keyboards/meira/lighting.c Executable file
View file

@ -0,0 +1,95 @@
#ifdef ISSI_ENABLE
#include <avr/sfr_defs.h>
#include <avr/timer_avr.h>
#include <avr/wdt.h>
#include "meira.h"
#include "issi.h"
#include "TWIlib.h"
#include "lighting.h"
#include "debug.h"
#include "audio/audio.h"
const uint8_t backlight_pwm_map[BACKLIGHT_LEVELS] = BACKLIGHT_PWM_MAP;
const uint8_t switch_matrices[] = {0, 1};
// Maps switch LEDs from Row/Col to ISSI matrix.
// Value breakdown:
// Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
// | | ISSI Col | ISSI Row |
// / |
// Device
// const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS] =
// KEYMAP(
// 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0xA9, 0xA8, 0xA7, 0xA6, 0xA5,
// 0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0xB9, 0xB8, 0xB7, 0xB6, 0xB5,
// 0x49, 0x48, 0x47, 0x45, 0x44, 0x43, 0x42, 0x41, 0xC9, 0xC8, 0xC7, 0xC6,
// 0x59, 0x58, 0x57, 0x56, 0x55, 0x51, 0xD6, 0xE5, 0xE4, 0xE3, 0xE2);
void backlight_set(uint8_t level){
#ifdef BACKLIGHT_ENABLE
uint8_t pwm_value = 0;
if(level >= BACKLIGHT_LEVELS){
level = BACKLIGHT_LEVELS;
}
if(level > 0){
pwm_value = backlight_pwm_map[level-1];
}
xprintf("BACKLIGHT_LEVELS: %d\n", BACKLIGHT_LEVELS);
xprintf("backlight_set level: %d pwm: %d\n", level, pwm_value);
for(int x = 1; x <= 9; x++){
for(int y = 1; y <= 9; y++){
activateLED(switch_matrices[0], x, y, pwm_value);
activateLED(switch_matrices[1], x, y, pwm_value);
}
}
#endif
}
void set_backlight_by_keymap(uint8_t col, uint8_t row){
// dprintf("LED: %02X, %d %d %d\n", lookup_value, matrix, led_col, led_row);
// activateLED(matrix, led_col, led_row, 255);
}
void force_issi_refresh(){
issi_devices[0]->led_dirty = true;
update_issi(0, true);
issi_devices[3]->led_dirty = true;
update_issi(3, true);
}
void led_test(){
#ifdef WATCHDOG_ENABLE
// This test take a long time to run, disable the WTD until its complete
wdt_disable();
#endif
backlight_set(0);
force_issi_refresh();
// for(uint8_t x = 0; x < sizeof(rgb_sequence); x++){
// set_rgb(rgb_sequence[x], 255, 0, 0);
// force_issi_refresh();
// _delay_ms(250);
// set_rgb(rgb_sequence[x], 0, 255, 0);
// force_issi_refresh();
// _delay_ms(250);
// set_rgb(rgb_sequence[x], 0, 0, 255);
// force_issi_refresh();
// _delay_ms(250);
// set_rgb(rgb_sequence[x], 0, 0, 0);
// force_issi_refresh();
// }
#ifdef WATCHDOG_ENABLE
wdt_enable(WDTO_250MS);
#endif
}
void backlight_init_ports(void){
xprintf("backlight_init_ports\n");
issi_init();
}
#endif

9
keyboards/meira/lighting.h Executable file
View file

@ -0,0 +1,9 @@
#ifndef LIGHTING_H
#define LIGHTING_H
void led_test(void);
void force_issi_refresh(void);
void set_backlight(uint8_t level);
void set_backlight_by_keymap(uint8_t col, uint8_t row);
#endif

314
keyboards/meira/matrix.c Normal file
View file

@ -0,0 +1,314 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2017 Cole Markham <cole@ccmcomputing.net>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* scan matrix
*/
#include <stdint.h>
#include <stdbool.h>
#if defined(__AVR__)
#include <avr/io.h>
#endif
#include "meira.h"
#include "wait.h"
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "config.h"
#include "timer.h"
#ifndef DEBOUNCING_DELAY
# define DEBOUNCING_DELAY 5
#endif
#if (DEBOUNCING_DELAY > 0)
static uint16_t debouncing_time;
static bool debouncing = false;
#endif
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
# define matrix_bitpop(i) bitpop(matrix[i])
# define ROW_SHIFTER ((uint8_t)1)
#elif (MATRIX_COLS <= 16)
# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
# define matrix_bitpop(i) bitpop16(matrix[i])
# define ROW_SHIFTER ((uint16_t)1)
#elif (MATRIX_COLS <= 32)
# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
# define matrix_bitpop(i) bitpop32(matrix[i])
# define ROW_SHIFTER ((uint32_t)1)
#endif
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
static const uint8_t col_pins[4] = MATRIX_COL_PINS;
//static const uint8_t lrow_pins[MATRIX_ROWS] = LED_ROW_PINS;
//static const uint8_t lcol_pins[4] = LED_COL_PINS;
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
static void init_rows(void);
//static void init_lcols(void);
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
static void unselect_cols(void);
static void select_col(uint8_t col);
__attribute__ ((weak))
void matrix_init_quantum(void) {
matrix_init_kb();
}
__attribute__ ((weak))
void matrix_scan_quantum(void) {
matrix_scan_kb();
}
__attribute__ ((weak))
void matrix_init_kb(void) {
matrix_init_user();
}
__attribute__ ((weak))
void matrix_scan_kb(void) {
matrix_scan_user();
}
__attribute__ ((weak))
void matrix_init_user(void) {
}
__attribute__ ((weak))
void matrix_scan_user(void) {
}
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void)
{
debug_enable = true;
debug_matrix = true;
debug_mouse = true;
// initialize row and col
unselect_cols();
init_rows();
// init_lcols();
// TX_RX_LED_INIT;
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
matrix_init_quantum();
}
uint8_t _matrix_scan(void)
{
// Set col, read rows
for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
# if (DEBOUNCING_DELAY > 0)
bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col);
if (matrix_changed) {
debouncing = true;
debouncing_time = timer_read();
}
# else
read_rows_on_col(matrix, current_col);
# endif
}
# if (DEBOUNCING_DELAY > 0)
if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = matrix_debouncing[i];
}
debouncing = false;
}
# endif
return 1;
}
uint8_t matrix_scan(void)
{
uint8_t ret = _matrix_scan();
matrix_scan_quantum();
// // HACK backlighting
// for (uint8_t t = 0; t < meira_get_backlight_level(); t++) {
// for (uint8_t x = 0; x < 13; x++) {
// for (uint8_t y = 0; y < 4; y++) {
// uint8_t pin = lcol_pins[y];
// if ((x >> y) & 1) {
// _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
// } else {
// _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LO
// }
// }
// }
// }
return ret;
}
bool matrix_is_modified(void)
{
if (debouncing) return false;
return true;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
pbin_reverse16(matrix_get_row(row));
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop16(matrix[i]);
}
return count;
}
static void init_rows(void)
{
for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
uint8_t pin = row_pins[x];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
// // HACK backlighting
// uint8_t lpin = lrow_pins[x];
// _SFR_IO8((lpin >> 4) + 1) |= _BV(lpin & 0xF); // OUT
// _SFR_IO8((lpin >> 4) + 2) |= _BV(lpin & 0xF); // HI
}
}
//static void init_lcols(void)
//{
// for (uint8_t x = 0; x < 4; x++) {
// uint8_t pin = lcol_pins[x];
// _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
// _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HIGH
// }
//}
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
{
bool matrix_changed = false;
// Select col and wait for col selection to stabilize
select_col(current_col);
wait_us(30);
// For each row...
for(uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++)
{
// Store last value of row prior to reading
matrix_row_t last_row_value = current_matrix[row_index];
// Check row pin state
if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
{
// Pin LO, set col bit
current_matrix[row_index] |= (ROW_SHIFTER << current_col);
}
else
{
// Pin HI, clear col bit
current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
}
// Determine if the matrix changed state
if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
{
matrix_changed = true;
}
}
// Unselect col
unselect_cols();
return matrix_changed;
}
static void select_col(uint8_t col)
{
#ifdef FLIPPED_BOARD
col = MATRIX_COLS - col - 1;
#endif
for(uint8_t x = 0; x < 4; x++) {
uint8_t pin = col_pins[x];
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
if (((col >> x) & 0x1) == 1){
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HIGH
} else {
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
}
}
}
static void unselect_cols(void)
{
// FIXME This really needs to use the global enable on the decoder, because currently this sets the value to col1
for(uint8_t x = 0; x < 4; x++) {
uint8_t pin = col_pins[x];
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
}
}

145
keyboards/meira/meira.c Normal file
View file

@ -0,0 +1,145 @@
/* Copyright 2017 REPLACE_WITH_YOUR_NAME
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "meira.h"
#include "issi.h"
#include "TWIlib.h"
#include "lighting.h"
#include "quantum.h"
#define BACKLIGHT_BREATHING
#ifdef AUDIO_ENABLE
float tone_startup[][2] = SONG(STARTUP_SOUND);
float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
#endif
void shutdown_user(void) {
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
_delay_ms(150);
stop_all_notes();
#endif
}
void matrix_init_kb(void)
{
debug_enable=true;
print("meira matrix_init_kb\n");
#ifdef AUDIO_ENABLE
_delay_ms(20); // gets rid of tick
PLAY_NOTE_ARRAY(tone_startup, false, 0);
#endif
#ifdef ISSI_ENABLE
issi_init();
#endif
backlight_set(5);
#ifdef WATCHDOG_ENABLE
// This is done after turning the layer LED red, if we're caught in a loop
// we should get a flashing red light
wdt_enable(WDTO_500MS);
#endif
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
}
void matrix_scan_kb(void)
{
#ifdef WATCHDOG_ENABLE
wdt_reset();
#endif
#ifdef ISSI_ENABLE
// switch/underglow lighting update
static uint32_t issi_device = 0;
static uint32_t twi_last_ready = 0;
if(twi_last_ready > 1000){
// Its been way too long since the last ISSI update, reset the I2C bus and start again
xprintf("TWI failed to recover, TWI re-init\n");
twi_last_ready = 0;
TWIInit();
force_issi_refresh();
}
if(isTWIReady()){
twi_last_ready = 0;
// If the i2c bus is available, kick off the issi update, alternate between devices
update_issi(issi_device, issi_device);
if(issi_device){
issi_device = 0;
}else{
issi_device = 3;
}
}else{
twi_last_ready++;
}
#endif
matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
// Test code that turns on the switch led for the key that is pressed
// set_backlight_by_keymap(record->event.key.col, record->event.key.row);
if (keycode == RESET) {
reset_keyboard_kb();
} else {
}
return process_record_user(keycode, record);
}
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
led_set_user(usb_led);
}
//void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
//{
//#ifdef AUDIO_ENABLE
// int8_t sign = 1;
//#endif
// if(id == LFK_ESC_TILDE){
// // Send ~ on shift-esc
// void (*method)(uint8_t) = (event->event.pressed) ? &add_key : &del_key;
// uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT));
// method(shifted ? KC_GRAVE : KC_ESCAPE);
// send_keyboard_report();
// }else if(event->event.pressed){
// switch(id){
// case LFK_CLEAR:
// // Go back to default layer
// layer_clear();
// break;
//#ifdef ISSI_ENABLE
// case LFK_LED_TEST:
// led_test();
// break;
//#endif
// }
// }
//}
void reset_keyboard_kb(){
#ifdef WATCHDOG_ENABLE
MCUSR = 0;
wdt_disable();
wdt_reset();
#endif
xprintf("programming!\n");
reset_keyboard();
}

48
keyboards/meira/meira.h Normal file
View file

@ -0,0 +1,48 @@
/* Copyright 2017 Cole Markham
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef MEIRA_H
#define MEIRA_H
#ifdef SUBPROJECT_featherble
#include "featherble.h"
#endif
#ifdef SUBPROJECT_promicro
#include "promicro.h"
#endif
#include "quantum.h"
void reset_keyboard_kb(void);
// This a shortcut to help you visually see your layout.
// The following is an example using the Planck MIT layout
// The first section contains all of the arguments
// The second converts the arguments into a two-dimensional array
#define KEYMAP( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \
) \
{ \
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \
}
#endif

View file

@ -0,0 +1,168 @@
/*
Copyright 2017 REPLACE_WITH_YOUR_NAME
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef PROMICROCONFIG_H
#define PROMICROCONFIG_H
#include "config_common.h"
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { F7, F6, F5, F4 }
// Column pins to demux in LSB order
#define MATRIX_COL_PINS { B1, B3, B2, B6 }
#define LED_EN_PIN D2
#define UNUSED_PINS
#define CATERINA_BOOTLOADER
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
//#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
//#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/*
* MIDI options
*/
/* Prevent use of disabled MIDI features in the keymap */
//#define MIDI_ENABLE_STRICT 1
/* enable basic MIDI features:
- MIDI notes can be sent when in Music mode is on
*/
//#define MIDI_BASIC
/* enable advanced MIDI features:
- MIDI notes can be added to the keymap
- Octave shift and transpose
- Virtual sustain, portamento, and modulation wheel
- etc.
*/
//#define MIDI_ADVANCED
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
#endif

View file

@ -0,0 +1,2 @@
#include "meira.h"

View file

@ -0,0 +1,10 @@
#ifndef FEATHERBLE_H
#define FEATHERBLE_H
#include "../meira.h"
#include "quantum.h"
#include "pro_micro.h"
#endif

Some files were not shown because too many files have changed in this diff Show more