This commit is contained in:
Jack Humbert 2016-11-12 20:54:37 -05:00
commit 33e62c080c
104 changed files with 5332 additions and 313 deletions

2
.gitignore vendored
View file

@ -30,3 +30,5 @@ CMakeLists.txt
.browse.VC.db*
*.stackdump
util/Win_Check_Output.txt
.vscode
.stfolder

View file

@ -21,8 +21,9 @@ RUN apt-get clean
RUN rm -rf /var/lib/apt/lists/*
ENV keyboard=ergodox
ENV subproject=ez
ENV keymap=default
VOLUME /qmk
WORKDIR /qmk
CMD make clean ; make keyboard=${keyboard} keymap=${keymap}
CMD make clean ; make keyboard=${keyboard} subproject=${subproject} keymap=${keymap}

View file

@ -32,7 +32,9 @@ ABS_ROOT_MAKEFILE := $(abspath $(ROOT_MAKEFILE))
ABS_STARTING_DIR := $(dir $(ABS_STARTING_MAKEFILE))
ABS_ROOT_DIR := $(dir $(ABS_ROOT_MAKEFILE))
STARTING_DIR := $(subst $(ABS_ROOT_DIR),,$(ABS_STARTING_DIR))
TEST_DIR := $(ROOT_DIR)/.build/test
BUILD_DIR := $(ROOT_DIR)/.build
TEST_DIR := $(BUILD_DIR)/test
ERROR_FILE := $(BUILD_DIR)/error_occured
MAKEFILE_INCLUDED=yes
@ -460,8 +462,21 @@ endef
include $(ROOT_DIR)/message.mk
RUN_COMMAND = \
$(COMMAND_$(SILENT_MODE)_$(COMMAND))
# The empty line is important here, as it will force a new shell to be created for each command
# Otherwise the command line will become too long with a lot of keyboards and keymaps
define RUN_COMMAND
+error_occured=0;\
$(COMMAND_$(SILENT_MODE)_$(COMMAND))\
if [ $$error_occured -gt 0 ]; then echo $$error_occured > $(ERROR_FILE); fi;
endef
define RUN_TEST
+error_occured=0;\
$($(TEST)_COMMAND))\
if [ $$error_occured -gt 0 ]; then echo $$error_occured > $(ERROR_FILE); fi;
endef
# Allow specifying just the subproject, in the keyboard directory, which will compile all keymaps
SUBPROJECTS := $(notdir $(patsubst %/Makefile,%,$(wildcard ./*/Makefile)))
@ -481,17 +496,17 @@ $(SUBPROJECTS): %: %-allkm
*) printf "$(MSG_SUBMODULE_DIRTY)";break;; \
esac \
done
rm -f $(ERROR_FILE) > /dev/null 2>&1
$(eval $(call PARSE_RULE,$@))
$(eval $(call SET_SILENT_MODE))
# Run all the commands in the same shell, notice the + at the first line
# it has to be there to allow parallel execution of the submake
# This always tries to compile everything, even if error occurs in the middle
# But we return the error code at the end, to trigger travis failures
+error_occured=0; \
$(foreach COMMAND,$(COMMANDS),$(RUN_COMMAND)) \
if [ $$error_occured -gt 0 ]; then printf "$(MSG_ERRORS)" & exit $$error_occured; fi;\
$(foreach TEST,$(TESTS),$($(TEST)_COMMAND)) \
if [ $$error_occured -gt 0 ]; then printf "$(MSG_ERRORS)" & exit $$error_occured; fi;\
$(foreach COMMAND,$(COMMANDS),$(RUN_COMMAND))
if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
$(foreach TEST,$(TESTS),$(RUN_TEST))
if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
# All should compile everything
.PHONY: all

View file

@ -153,6 +153,11 @@ ifeq ($(strip $(UCIS_ENABLE)), yes)
UNICODE_ENABLE = yes
endif
ifeq ($(strip $(UNICODEMAP_ENABLE)), yes)
OPT_DEFS += -DUNICODEMAP_ENABLE
UNICODE_ENABLE = yes
endif
ifeq ($(strip $(UNICODE_ENABLE)), yes)
OPT_DEFS += -DUNICODE_ENABLE
SRC += $(QUANTUM_DIR)/process_keycode/process_unicode.c
@ -181,6 +186,14 @@ ifeq ($(strip $(SERIAL_LINK_ENABLE)), yes)
VAPTH += $(SERIAL_PATH)
endif
ifneq ($(strip $(VARIABLE_TRACE)),)
SRC += $(QUANTUM_DIR)/variable_trace.c
OPT_DEFS += -DNUM_TRACED_VARIABLES=$(strip $(VARIABLE_TRACE))
ifneq ($(strip $(MAX_VARIABLE_TRACE_SIZE)),)
OPT_DEFS += -DMAX_VARIABLE_TRACE_SIZE=$(strip $(MAX_VARIABLE_TRACE_SIZE))
endif
endif
# Optimize size but this may cause error "relocation truncated to fit"
#EXTRALDFLAGS = -Wl,--relax

View file

@ -84,7 +84,7 @@ KC_PAUSE KC_PAUS 48 Keyboard Pause1
KC_INSERT KC_INS 49 Keyboard Insert1
KC_HOME 4A Keyboard Home1
KC_PGUP 4B Keyboard PageUp1
KC_DELETE KC_DELETE 4C Keyboard Delete Forward
KC_DELETE KC_DEL 4C Keyboard Delete Forward
KC_END 4D Keyboard End1
KC_PGDOWN KC_PGDN 4E Keyboard PageDown1
KC_RIGHT KC_RGHT 4F Keyboard RightArrow1

View file

@ -0,0 +1,80 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER Arbitrary Definitions
#define PRODUCT Planckeus
#define DESCRIPTION q.m.k. keyboard firmware for Planckeus
/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 11
#define MATRIX_ROW_PINS { D0, D1, D2, D3 }
#define MATRIX_COL_PINS { F6, F5, F4, F1, F0, F7, B0, B1, B2, B3, B7 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
//#define BACKLIGHT_LEVELS 3
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

View file

@ -0,0 +1,45 @@
#include "atreus.h"
#define BASE 0
#define SYMB 1
#define ETC 2
enum macro_id {
TEENSY,
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[BASE] = KEYMAP(
KC_Q, KC_W, KC_D, KC_F, KC_K, KC_J, KC_U, KC_R, KC_L, KC_SCLN,
LT(ETC,KC_A), KC_S, KC_E, KC_T, KC_G, KC_Y, KC_N, KC_I, KC_O, KC_H,
SFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_P, KC_M, KC_COMM, KC_DOT, SFT_T(KC_SLSH),
KC_GRV, KC_DEL, KC_LALT, GUI_T(KC_TAB), LT(SYMB,KC_BSPC), CTL_T(KC_ESC), SFT_T(KC_ENT), LT(SYMB,KC_SPC), GUI_T(KC_LEFT), KC_DOWN, KC_UP, LCAG_T(KC_RGHT)
),
[SYMB] = KEYMAP(
KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, KC_EQL, KC_7, KC_8, KC_9, KC_PLUS,
KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_BSLS, KC_MINS, KC_4, KC_5, KC_6, KC_QUOT,
KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_ASTR, KC_UNDS, KC_1, KC_2, KC_3, KC_DQUO,
KC_TILD, KC_AMPR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_NO, KC_DOT, KC_TRNS
),
[ETC] = KEYMAP(
RESET, KC_NO, KC_NO, KC_NO, KC_PGUP, KC_VOLU, KC_F7, KC_F8, KC_F9, KC_HOME,
LT(ETC,KC_A), KC_NO, KC_NO, KC_NO, KC_PGDN, KC_VOLD, KC_F4, KC_F5, KC_F6, KC_END,
KC_NO, KC_NO, KC_NO, KC_NO, KC_DEL, KC_MUTE, KC_F1, KC_F2, KC_F3, KC_INS,
KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO
),
};
const uint16_t PROGMEM fn_actions[] = {
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
switch(id) {
case TEENSY:
break;
}
return MACRO_NONE;
};

View file

@ -1 +1,5 @@
# The default keymap for cluecard
Note that this keymap has audio enabled, so the RGB mode button does not go through the different effects.
So the LEDs will still show a static light, that is configurable with the hue, staturation and brightness
buttons. You can of course also turn them on and off with the on/off button.

View file

@ -0,0 +1,21 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,12 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
// place overrides here
#define RGBLIGHT_TIMER
#define RGBLIGHT_EFFECT_SNAKE_LENGTH 3
#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 2
#endif

View file

@ -0,0 +1,28 @@
#include "cluecard.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP(
RGB_TOG, RGB_SAI, RGB_VAI, \
RGB_HUD, RGB_HUI, \
RGB_MOD, RGB_SAD, RGB_VAD, \
BL_STEP, \
KC_NO, KC_NO, KC_NO \
)
};
const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {255, 170, 85};
const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {255, 170, 85};
void matrix_init_user(void) {
}
void matrix_scan_user(void) {
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
void led_set_user(uint8_t usb_led) {
}

View file

@ -0,0 +1,7 @@
# RGB effect test keymap for cluecard
This keymap is made for testing the RGB effects. Audio is disabled and the mode buttons goes through each
effect. If you run HID-listen you will be able to see which effect is active. For a list of effects, check
the `rgblight.c` file.
The hue, saturation and brightness buttons will work depending on which effect is active.

View file

@ -2,23 +2,3 @@
#include "debug.h"
#include "action_layer.h"
// swap-hands action needs a matrix to define the swap
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
/* Left hand, matrix positions */
{{0,13}, {1,13}, {2,13}, {3,13}, {4,13}, {5,13}},
{{0,12}, {1,12}, {2,12}, {3,12}, {4,12}, {5,12}},
{{0,11}, {1,11}, {2,11}, {3,11}, {4,11}, {5,11}},
{{0,10}, {1,10}, {2,10}, {3,10}, {4,10}, {5,10}},
{{0,9}, {1,9}, {2,9}, {3,9}, {4,9}, {5,9}},
{{0,8}, {1,8}, {2,8}, {3,8}, {4,8}, {5,8}},
{{0,7}, {1,7}, {2,7}, {3,7}, {4,7}, {5,7}},
/* Right hand, matrix positions */
{{0,6}, {1,6}, {2,6}, {3,6}, {4,6}, {5,6}},
{{0,5}, {1,5}, {2,5}, {3,5}, {4,5}, {5,5}},
{{0,4}, {1,4}, {2,4}, {3,4}, {4,4}, {5,4}},
{{0,3}, {1,3}, {2,3}, {3,3}, {4,3}, {5,3}},
{{0,2}, {1,2}, {2,2}, {3,2}, {4,2}, {5,2}},
{{0,1}, {1,1}, {2,1}, {3,1}, {4,1}, {5,1}},
{{0,0}, {1,0}, {2,0}, {3,0}, {4,0}, {5,0}},
};

View file

@ -82,4 +82,25 @@ out:
return mcp23018_status;
}
#ifdef ONEHAND_ENABLE
__attribute__ ((weak))
// swap-hands action needs a matrix to define the swap
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
/* Left hand, matrix positions */
{{0,13}, {1,13}, {2,13}, {3,13}, {4,13}, {5,13}},
{{0,12}, {1,12}, {2,12}, {3,12}, {4,12}, {5,12}},
{{0,11}, {1,11}, {2,11}, {3,11}, {4,11}, {5,11}},
{{0,10}, {1,10}, {2,10}, {3,10}, {4,10}, {5,10}},
{{0,9}, {1,9}, {2,9}, {3,9}, {4,9}, {5,9}},
{{0,8}, {1,8}, {2,8}, {3,8}, {4,8}, {5,8}},
{{0,7}, {1,7}, {2,7}, {3,7}, {4,7}, {5,7}},
/* Right hand, matrix positions */
{{0,6}, {1,6}, {2,6}, {3,6}, {4,6}, {5,6}},
{{0,5}, {1,5}, {2,5}, {3,5}, {4,5}, {5,5}},
{{0,4}, {1,4}, {2,4}, {3,4}, {4,4}, {5,4}},
{{0,3}, {1,3}, {2,3}, {3,3}, {4,3}, {5,3}},
{{0,2}, {1,2}, {2,2}, {3,2}, {4,2}, {5,2}},
{{0,1}, {1,1}, {2,1}, {3,1}, {4,1}, {5,1}},
{{0,0}, {1,0}, {2,0}, {3,0}, {4,0}, {5,0}},
};
#endif

View file

@ -1,3 +1,33 @@
<!-- -*- mode: markdown; fill-column: 8192 -*- -->
## v1.9
*2016-10-16*
### Overall changes
* `F12` was replaced by an `Fx` key, that activate the **Media** layer as a one-shot layer, and also `Alt` as a one-shot modifier.
### Base layer changes
* The `Media Stop` key is now a tap-dance key, and resets the device for programming on the fourth tap.
### Miscellaneous
* `π` can now be entered with UCIS.
* `🐁` can now be entered with UCIS.
### Tools
* The `tools/layer-notify` tool was removed, it was an example, which I don't use.
#### `tools/hid-commands`
* Now looks at the `DISABLE_APPSEL_START` environment value, and does not display an AppSel notification if it is non-empty.
* Will attempt to re-program the keyboard when receiving a `reflash` command.
* No longer tries to select Emacs 24 on `APPSEL_EMACS`, rather, it goes for any Emacs.
* The `APPSEL_MUSIC` command now includes Kodi in the list too, as the last choice.
## v1.8
*2016-10-03*
@ -13,7 +43,7 @@
### Miscellaneous
* Fixed the [Steno](#steno-layer) toggle key.
* Fixed the **Steno** toggle key.
## v1.7
@ -21,9 +51,9 @@
### Overall changes
* The number row has been completely rearranged on both the [Base](#base-layer) and the [ADORE](#adore-layer) layers.
* The number row has been completely rearranged on both the **Base** and the **ADORE** layers.
* The number/function key behavior was changed: function keys are now on the **Media**.
* The `:`/`;` and `-`/`_` keys were put back to their thumb position on the bottom row, on both the [Base](#base-layer) and [ADORE](#adore-layer) layers.
* The `:`/`;` and `-`/`_` keys were put back to their thumb position on the bottom row, on both the **Base** and **ADORE** layers.
* The bottom large keys on the inner side of each half now function as [tmux](http://tmux.github.io/) keys: the left to send the prefix, the right to send the `display-panes` key. The left also doubles as a GNU screen prefix key, and sends `C-a` when double tapped.
* A number of functions, such as the **AppSel** layer, now require the `hid-commands` tool to be running, with the output of `hid_listen` being piped to it.
@ -59,13 +89,13 @@
### Base layer changes
* The parentheses & bracket keys have been merged: tapping them results in `[` or `{` (if it was shifted), double tapping leads to `(`.
* The `:;` and `-_` keys are now available on the base layer, on their [ADORE](#adore-layer) location, too, just below `[{(`/`]})`.
* The `:;` and `-_` keys are now available on the base layer, on their **ADORE** location, too, just below `[{(`/`]})`.
* The `Apps` key has been replaced by `F12`.
* The `-`/`_` is no longer a tap-dance key.
### ADORE layer changes
* Adjustments were made to the [ADORE](#adore-layer) layer, to separate some inconvenient combinations.
* Adjustments were made to the **ADORE** layer, to separate some inconvenient combinations.
### Miscellaneous changes
@ -84,9 +114,9 @@
* The **1HAND** layer has been removed.
* A `Delete` key is now available on the right thumb cluster.
* The [ADORE](#adore-layer) layer received a major update, see the layout image above.
* It is now possible to enable automatic logging for the [ADORE](#adore-layer) layer, by setting the `ADORE_AUTOLOG` makefile variable to `yes` when compiling the keymap. It is off by default.
* The `~` key and the `Media Next/Prev` key have been swapped on the [base layer](#base-layer).
* The **ADORE** layer received a major update, see the layout image above.
* It is now possible to enable automatic logging for the **ADORE** layer, by setting the `ADORE_AUTOLOG` makefile variable to `yes` when compiling the keymap. It is off by default.
* The `~` key and the `Media Next/Prev` key have been swapped on the **Base** layer.
* On the **ARROW** layer, `Backspace` has been replaced by `Enter`.
* There is some experimental support for entering Unicode symbols.
@ -104,33 +134,33 @@
*2016-07-06*
* Added support for logging keys, by pressing `LEAD d`. Also included is a tool to generate a [heatmap](#heatmap) out of the logs.
* The arrow and navigation keys were rearranged again, and now require an additional key being held to activate. See the [base layer](#base-layer) for an image that shows where arrows are.
* The **experimental** layer has been redone, and is now called [ADORE](#adore-layer), and as such, can be enabled by `LEAD a` now.
* Added support for logging keys, by pressing `LEAD d`. Also included is a tool to generate a *heatmap* out of the logs.
* The arrow and navigation keys were rearranged again, and now require an additional key being held to activate. See the **Base** layer for an image that shows where arrows are.
* The **experimental** layer has been redone, and is now called **ADORE**, and as such, can be enabled by `LEAD a` now.
* Switching between Dvorak and ADORE is now persisted into EEPROM, and survives a reboot.
## v1.2
*2016-06-22*
* The forced NKRO mode can be easily toggled off at compile-time, to make the firmware compatible with [certain operating systems](#using-on-windows).
* The forced NKRO mode can be easily toggled off at compile-time, to make the firmware compatible with certain operating systems.
* The `:;` key has changed behaviour: to access the `;` symbol, the key needs to be double-tapped, instead of shifted.
* The `=` and `\` keys were swapped, `=` moved to the home row, on both the [base](#base-layer) and the **experimental** layers.
* The `=` and `\` keys were swapped, `=` moved to the home row, on both the **Base** and the **experimental** layers.
* The arrow and navigation keys were redone, they are now more accessible, but the navigation keys require an extra tap to access.
* The **Emacs** layer is gone, replaced by a simplified **navigation and media** layer.
* `LEAD v` types the firmware version, and the keymap version.
* On the **experimental** layer, the `L` and `Q`, and the `K` and `G` keys were swapped.
* The [Steno](#steno-layer) layer gained a few more `#` and `*` keys, to make it easier on my fingers.
* The **Steno** layer gained a few more `#` and `*` keys, to make it easier on my fingers.
## v1.1
*2016-06-14*
* The keyboard starts in NKRO mode, bootmagic and other things are disabled.
* A [Steno](#steno-layer) layer was added, to be used with Plover.
* A **Steno** layer was added, to be used with Plover.
* An **experimental** layer was added, something halfway between Dvorak and Capewell-Dvorak. A work in progress.
* `LEAD y` types `\o/`.
* Some keys on the [Base](#base-layer) layer have been moved around:
* Some keys on the **Base** layer have been moved around:
- `?` moved to the left pinky, left of `Q`.
- `=` shifted one row down, but `F11` stayed where it was.
- `-` on the left half was replaced by `Tab`.

Binary file not shown.

Before

Width:  |  Height:  |  Size: 95 KiB

After

Width:  |  Height:  |  Size: 95 KiB

Before After
Before After

Binary file not shown.

Before

Width:  |  Height:  |  Size: 100 KiB

After

Width:  |  Height:  |  Size: 100 KiB

Before After
Before After

View file

@ -64,6 +64,9 @@ enum {
A_8,
A_9,
A_0,
// Fx
Fx,
};
/* Fn keys */
@ -86,6 +89,7 @@ enum {
CT_RBP,
CT_TMUX,
CT_TPS,
CT_SR,
};
/* States & timers */
@ -103,6 +107,7 @@ bool log_enable = false;
#endif
bool time_travel = false;
bool skip_leds = false;
static uint8_t is_adore = 0;
@ -113,13 +118,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap 0: Base Layer
*
* ,-----------------------------------------------------. ,-----------------------------------------------------.
* | Next/Prev | 9 | 7 @ | 5 * | 3 ^ | 1 $ | F11 | | F12 | 0 % | 2 ! | 4 # | 6 & | 8 | Plover |
* | Next/Prev | 9 | 7 @ | 5 * | 3 ^ | 1 $ | F11 | | Fx | 0 % | 2 ! | 4 # | 6 & | 8 | Plover |
* |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------|
* | ~ | ' | , | . | P | Y | ( | | ) | F | G | C | R | L | \ |
* |-----------+------+------+------+------+------| [ | | ] |------+------+------+------+------+-----------|
* | Tab/ARROW | A | O | E | U | I |------| |------| D | H | T | N | S | = / Arrow |
* |-----------+------+------+------+------+------| tmux | | tmux |------+------+------+------+------+-----------|
* | Play/Pause| / | Q | J | K | X | | | Pane | B | M | W | V | Z | Stop |
* | Play/Pause| / | Q | J | K | X | | | Pane | B | M | W | V | Z | Stop/Reset|
* `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------'
* | | | | | : | | - | | | | |
* `-----------------------------------' `-----------------------------------'
@ -144,10 +149,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
,KC_BSPC,F(F_SFT),KC_ESC
// right hand
,KC_F12 ,M(A_0) ,M(A_2) ,M(A_4) ,M(A_6) ,M(A_8) ,M(A_PLVR)
,M(Fx) ,M(A_0) ,M(A_2) ,M(A_4) ,M(A_6) ,M(A_8) ,M(A_PLVR)
,TD(CT_RBP),KC_F ,KC_G ,KC_C ,KC_R ,KC_L ,KC_BSLS
,KC_D ,KC_H ,KC_T ,KC_N ,KC_S ,KC_EQL
,TD(CT_TPS),KC_B ,KC_M ,KC_W ,KC_V ,KC_Z ,KC_MSTP
,TD(CT_TPS),KC_B ,KC_M ,KC_W ,KC_V ,KC_Z ,TD(CT_SR)
,KC_MINS ,KC_NO ,KC_NO ,KC_NO ,KC_NO
,OSL(NMDIA),KC_DEL
@ -158,7 +163,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap 1: Adore layer
*
* ,-----------------------------------------------------. ,-----------------------------------------------------.
* | Play/Pause| 9 | 7 @ | 5 * | 3 ^ | 1 $ | F11 | | F12 | 0 % | 2 ! | 4 # | 6 & | 8 | Plover |
* | Play/Pause| 9 | 7 @ | 5 * | 3 ^ | 1 $ | F11 | | Fx | 0 % | 2 ! | 4 # | 6 & | 8 | Plover |
* |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------|
* | \ | X | W | C | H | F | ( | | ) | M | G | L | P | / | `~ |
* |-----------+------+------+------+------+------| [ | | ] |------+------+------+------+------+-----------|
@ -189,7 +194,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
,KC_BSPC,F(F_SFT),KC_ESC
// right hand
,KC_F12 ,M(A_0) ,M(A_2) ,M(A_4) ,M(A_6) ,M(A_8) ,M(A_PLVR)
,M(Fx) ,M(A_0) ,M(A_2) ,M(A_4) ,M(A_6) ,M(A_8) ,M(A_PLVR)
,TD(CT_RBP),KC_M ,KC_G ,KC_L ,KC_P ,KC_SLSH ,KC_GRV
,KC_D ,KC_R ,KC_T ,KC_N ,KC_S ,KC_EQL
,TD(CT_TPS),KC_B ,KC_K ,KC_V ,KC_Y ,KC_J ,KC_NO
@ -342,7 +347,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap 5: Navigation & Media layer
*
* ,-----------------------------------------------------. ,-----------------------------------------------------.
* | | F9 | F7 | F5 | F3 | F1 | | |ScrLCK| F10 | F2 | F4 | F6 | F8 | |
* | | F9 | F7 | F5 | F3 | F1 |ScrLCK| | | F10 | F2 | F4 | F6 | F8 | |
* |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------|
* | | | | | | | | | | | | | | | |
* |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------|
@ -362,7 +367,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
*/
[NMDIA] = KEYMAP(
// left hand
KC_NO ,KC_F9 ,KC_F7 ,KC_F5 ,KC_F3 ,KC_F1 ,KC_NO
KC_NO ,KC_F9 ,KC_F7 ,KC_F5 ,KC_F3 ,KC_F1 ,LGUI(KC_L)
,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
@ -372,7 +377,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
,KC_NO ,KC_NO ,KC_TRNS
// right hand
,LGUI(KC_L),KC_F10 ,KC_F2 ,KC_F4 ,KC_F6 ,KC_F8 ,KC_NO
,KC_TRNS ,KC_F10 ,KC_F2 ,KC_F4 ,KC_F6 ,KC_F8 ,KC_NO
,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
@ -611,6 +616,17 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
toggle_steno(record->event.pressed);
break;
/* Fx */
case Fx:
if (record->event.pressed) {
set_oneshot_mods (MOD_LALT);
layer_on (NMDIA);
set_oneshot_layer (NMDIA, ONESHOT_START);
} else {
clear_oneshot_layer_state (ONESHOT_PRESSED);
}
break;
/* GUI & AppSel */
case A_GUI:
if (record->event.pressed) {
@ -780,6 +796,56 @@ static void ang_tap_dance_tmux_pane_select (qk_tap_dance_state_t *state, void *u
unregister_code(kc);
}
static void
_td_sr_each (qk_tap_dance_state_t *state, void *user_data) {
skip_leds = true;
switch (state->count) {
case 1:
ergodox_right_led_3_on ();
break;
case 2:
ergodox_right_led_2_on ();
break;
case 3:
ergodox_right_led_1_on ();
break;
case 4:
ergodox_right_led_3_off ();
wait_ms (50);
ergodox_right_led_2_off ();
wait_ms (50);
ergodox_right_led_1_off ();
break;
}
}
static void
_td_sr_finished (qk_tap_dance_state_t *state, void *user_data) {
if (state->count == 1) {
register_code (KC_MSTP);
}
if (state->count >= 4) {
uprintf("CMD:reflash\n");
wait_ms (1000);
reset_keyboard ();
reset_tap_dance (state);
}
}
static void
_td_sr_reset (qk_tap_dance_state_t *state, void *user_data) {
ergodox_right_led_1_off ();
wait_ms (50);
ergodox_right_led_2_off ();
wait_ms (50);
ergodox_right_led_3_off ();
if (state->count == 1) {
unregister_code (KC_MSTP);
}
}
qk_tap_dance_action_t tap_dance_actions[] = {
[CT_CLN] = ACTION_TAP_DANCE_DOUBLE (KC_COLN, KC_SCLN)
,[CT_TA] = {
@ -790,77 +856,75 @@ qk_tap_dance_action_t tap_dance_actions[] = {
,[CT_RBP] = ACTION_TAP_DANCE_DOUBLE (KC_RBRC, KC_RPRN)
,[CT_TMUX]= ACTION_TAP_DANCE_FN (ang_tap_dance_tmux_finished)
,[CT_TPS] = ACTION_TAP_DANCE_FN (ang_tap_dance_tmux_pane_select)
,[CT_SR] = ACTION_TAP_DANCE_FN_ADVANCED (_td_sr_each, _td_sr_finished, _td_sr_reset)
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
static uint32_t prev_layer_state;
uint8_t layer = biton32(layer_state);
bool is_arrow = false;
static char *layer_lookup[] = {"Dvorak", "ADORE", "Arrows", "AppSel", "Hungarian", "Nav/Media", "Plover"};
if (layer_state != prev_layer_state) {
prev_layer_state = layer_state;
if (layer_lookup[layer])
uprintf("LAYER: %s\n", layer_lookup[layer]);
}
if (gui_timer && timer_elapsed (gui_timer) > TAPPING_TERM)
unregister_code (KC_LGUI);
if (layer == HUN) {
ergodox_right_led_2_on();
ergodox_right_led_3_on();
} else if (layer == NMDIA) {
ergodox_right_led_1_on();
ergodox_right_led_2_on();
} else if (layer == PLVR) {
ergodox_right_led_1_on ();
ergodox_right_led_2_on ();
ergodox_right_led_3_on ();
} else if (layer == ADORE) {
ergodox_right_led_1_on ();
ergodox_right_led_2_on ();
ergodox_right_led_3_on ();
if (!skip_leds) {
if (layer == HUN) {
ergodox_right_led_2_on();
ergodox_right_led_3_on();
} else if (layer == NMDIA) {
ergodox_right_led_1_on();
ergodox_right_led_2_on();
} else if (layer == PLVR) {
ergodox_right_led_1_on ();
ergodox_right_led_2_on ();
ergodox_right_led_3_on ();
} else if (layer == ADORE) {
ergodox_right_led_1_on ();
ergodox_right_led_2_on ();
ergodox_right_led_3_on ();
ergodox_right_led_2_set (LED_BRIGHTNESS_HI);
ergodox_right_led_2_set (LED_BRIGHTNESS_HI);
}
}
if (layer_state & (1UL << ARRW)) {
ergodox_right_led_1_on ();
ergodox_right_led_3_on ();
if (!skip_leds) {
ergodox_right_led_1_on ();
ergodox_right_led_3_on ();
}
is_arrow = true;
}
if (keyboard_report->mods & MOD_BIT(KC_LSFT) ||
((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) {
ergodox_right_led_1_set (LED_BRIGHTNESS_HI);
ergodox_right_led_1_on ();
} else {
ergodox_right_led_1_set (LED_BRIGHTNESS_LO);
if (layer != NMDIA && layer != PLVR && layer != ADORE && !is_arrow)
ergodox_right_led_1_off ();
}
if (!skip_leds) {
if (keyboard_report->mods & MOD_BIT(KC_LSFT) ||
((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) {
ergodox_right_led_1_set (LED_BRIGHTNESS_HI);
ergodox_right_led_1_on ();
} else {
ergodox_right_led_1_set (LED_BRIGHTNESS_LO);
if (layer != NMDIA && layer != PLVR && layer != ADORE && !is_arrow)
ergodox_right_led_1_off ();
}
if (keyboard_report->mods & MOD_BIT(KC_LALT) ||
((get_oneshot_mods() & MOD_BIT(KC_LALT)) && !has_oneshot_mods_timed_out())) {
ergodox_right_led_2_set (LED_BRIGHTNESS_HI);
ergodox_right_led_2_on ();
} else {
ergodox_right_led_2_set (LED_BRIGHTNESS_LO);
if (layer != HUN && layer != NMDIA && layer != PLVR && layer != ADORE)
ergodox_right_led_2_off ();
}
if (keyboard_report->mods & MOD_BIT(KC_LALT) ||
((get_oneshot_mods() & MOD_BIT(KC_LALT)) && !has_oneshot_mods_timed_out())) {
ergodox_right_led_2_set (LED_BRIGHTNESS_HI);
ergodox_right_led_2_on ();
} else {
ergodox_right_led_2_set (LED_BRIGHTNESS_LO);
if (layer != HUN && layer != NMDIA && layer != PLVR && layer != ADORE)
ergodox_right_led_2_off ();
}
if (keyboard_report->mods & MOD_BIT(KC_LCTRL) ||
((get_oneshot_mods() & MOD_BIT(KC_LCTRL)) && !has_oneshot_mods_timed_out())) {
ergodox_right_led_3_set (LED_BRIGHTNESS_HI);
ergodox_right_led_3_on ();
} else {
ergodox_right_led_3_set (LED_BRIGHTNESS_LO);
if (layer != HUN && layer != PLVR && layer != ADORE && !is_arrow)
ergodox_right_led_3_off ();
if (keyboard_report->mods & MOD_BIT(KC_LCTRL) ||
((get_oneshot_mods() & MOD_BIT(KC_LCTRL)) && !has_oneshot_mods_timed_out())) {
ergodox_right_led_3_set (LED_BRIGHTNESS_HI);
ergodox_right_led_3_on ();
} else {
ergodox_right_led_3_set (LED_BRIGHTNESS_LO);
if (layer != HUN && layer != PLVR && layer != ADORE && !is_arrow)
ergodox_right_led_3_off ();
}
}
LEADER_DICTIONARY() {
@ -974,7 +1038,9 @@ const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE
UCIS_SYM("snowman", 0x2603),
UCIS_SYM("coffee", 0x2615),
UCIS_SYM("heart", 0x2764),
UCIS_SYM("bolt", 0x26a1)
UCIS_SYM("bolt", 0x26a1),
UCIS_SYM("pi", 0x03c0),
UCIS_SYM("mouse", 0x1f401)
);
bool process_record_user (uint16_t keycode, keyrecord_t *record) {

View file

@ -43,6 +43,7 @@ At its core, this is a Dvorak layout, with some minor changes. The more interest
* The `GUI` key is special, because when I double-tap it, it sends `GUI + w`, which pops up an application selector. It also switches to a one-shot layer, where the number row on the left half turns into app selector macros, for the most common things I usually want to switch to. Otherwise it behaves as on a normal layout.
* The `ESC` key also doubles as a one-shot cancel key: if tapped while any of the one-shot modifiers are in-flight (as in, single-tapped, and not expired yet), it cancels all one-shot modifiers. It also cancels the **Hun** layer, if active. Otherwise it sends the usual keycode.
* The **Media** and **Hun** layer keys are one-shot, the **STENO** key is a toggle.
* The **Fx** key is one-shot, and activates the **Media** layer, along with a one-shot `Alt`.
* When holding the `Tab`/**Arrow** key, the arrow layer activates while the key is held. Tapping the key produces the normal, `Tab` key. Double-tapping it toggles the **Arrow** layer on until a third tap.
* Tapping the `:` key once yields `:`, tapping it twice yields `;`.
* Tapping the `[{(`/`)}]` keys once yields `[` (or `{` when shifted), tapping them twice yields `(`.
@ -93,12 +94,7 @@ Unless noted otherwise, the layers use a dim light for the LEDs, while modifiers
Once in the Unicode Symbol Input mode, one is able to type in symbol names, press `Enter` or `Space`, and get the Unicode symbol itself back. When in the mode, a capital `U` is printed first. Once the sequence is finished, all of it is erased by sending enough `Backspace` taps, and the firmware starts the OS-specific unicode input sequence. Then, it looks up the symbol name, and enters the associated code. If it is not found, it will just replay the pressed keycodes.
The currently supported symbols are:
- `snowman`: ☃
- `kiss`: 😙
- `rofl`: 🤣
- `poop`: 💩
For the list of supported symbols, please see the source.
This is an experimental feature, and may or may not work reliably.

View file

@ -65,7 +65,7 @@
"x": 4.5,
"f": 3
},
"F12",
"Fx",
{
"a": 4,
"f": 3,

Some files were not shown because too many files have changed in this diff Show more