Add support of iWRAP5

- mouse virtical wheel
- consumer page
This commit is contained in:
tmk 2013-04-18 15:51:14 +09:00
commit a77ae5f843
11 changed files with 402 additions and 27 deletions

View file

@ -29,8 +29,6 @@ OPT_DEFS = -DDEBUG_LEVEL=0
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
MCU = atmega328p
# avrdude doesn't know atmega168p
AVRDUDE_MCU = $(MCU)
# Processor frequency.
@ -41,6 +39,15 @@ AVRDUDE_MCU = $(MCU)
F_CPU = 12000000
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=2048
# Build Options
# comment out to disable the options.
#
@ -75,8 +82,8 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
#AVRDUDE_FLAGS = -p $(AVRDUDE_MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
AVRDUDE_FLAGS = -p $(AVRDUDE_MCU) -c $(AVRDUDE_PROGRAMMER)
#AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
@ -89,9 +96,8 @@ PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE
VPATH += $(TARGET_DIR)
VPATH += $(TOP_DIR)
#include $(TOP_DIR)/protocol/iwrap.mk
# To be swatchable btween Bluetooth and USB. Comment out if you don't need USB.
include $(TOP_DIR)/protocol/vusb.mk
#include $(TOP_DIR)/protocol.mk
include $(TOP_DIR)/protocol/iwrap.mk
# TODO: to be selectable: V-USB, LUFA or PJRC
#include $(TOP_DIR)/protocol/vusb.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk

View file

@ -2,10 +2,22 @@ IWRAP_DIR = protocol/iwrap
OPT_DEFS += -DPROTOCOL_IWRAP
SRC += $(IWRAP_DIR)/iwrap.c \
SRC += $(IWRAP_DIR)/main.c \
$(IWRAP_DIR)/iwrap.c \
$(IWRAP_DIR)/suart.S \
$(IWRAP_DIR)/sendchar_uart.c \
$(IWRAP_DIR)/uart.c
$(COMMON_DIR)/sendchar_uart.c \
$(COMMON_DIR)/uart.c
# TODO: compatible with LUFA and PJRC
# V-USB
#
#VUSB_DIR = protocol/vusb
#OPT_DEFS += -DPROTOCOL_VUSB
#SRC += $(VUSB_DIR)/vusb.c \
# $(VUSB_DIR)/usbdrv/usbdrv.c \
# $(VUSB_DIR)/usbdrv/usbdrvasm.S \
# $(VUSB_DIR)/usbdrv/oddebug.c
#VPATH += $(TOP_DIR)/protocol/vusb:$(TOP_DIR)/protocol/vusb/usbdrv
# Search Path

View file

@ -0,0 +1 @@
05010906a1010507850119e029e715002501750195088102950175088101950575010508850119012905910295017503910395067508150025650507190029658100c005010902a1010901a1008502050919012903150025019503750181020501093815f1250f9501750581060501093009311581257f750895028106c0c0050c0901a1018503050c1500250109e909ea09e209cd19b529b87501950881020a8a010a21020a2a021a23022a27027501950881020a83010a96010a92010a9e010a94010a060209b209b4750195088102c0

View file

@ -0,0 +1 @@
050c0901a1018503050c1500250109e909ea09e209cd19b529b87501950881020a8a010a21020a2a021a23022a27027501950881020a83010a96010a92010a9e010a94010a060209b209b4750195088102c0

376
protocol/iwrap/iWRAP4.txt Normal file
View file

@ -0,0 +1,376 @@
Bulegiga WT12
=============
WT12 is a bluetooth module from Bluegiga. http://www.bluegiga.com/
iWRAP
higher layer interface for bluetooth firmware
communicate with UART
iWRAP HID
default setting
115200 8bit/n/1/n
TODO
----
KiCAD circuit/PCB design
power saving
AVR sleep(15ms by watch dog timer)
WT12 sleep
measuring current consumption
measuring battery life of normal usage/idle/intensive usage
software reset/bootloarder
LED indicator(chaging/paring/connecting)
license confirmation of suart.c
consumer page is not working
authenticate method/SSP
SPP keyboard support
SPP debug console support
mouse wheel feature request to Bluegiga
Problems
--------
power consumption
no consumer page support(bug?)
no mouse wheel support
no paring management
no interactive auth method
UART hardware flow control
--------------------------
(iWRAP4 User Guide 9.5)
Hardware flow control is enabled by default and it should not be disabled unless mandatory, because without the hardware flow control the data transmission may not be reliable.
If the hardware flow control is enabled from PS-keys, but no flow control is used, the following steps should be implemented in the hardware design:
- CTS pin must be grounded
- RTS pin must be left floating
Power Saving
------------
power consume
without opimization: 4hr to shutdown(310mAh)
2011/08/25: 9hr(310mAh) SNIFF MASTER sleep/WDTO_120MS
measure current consumption
HHKB keyswitch matrix board
idle
scanning
Bluegiga WT12 module
SLEEP command
deep sleep on/off in config bits
HHKB keyswich
how to power off
I/O pin configuration when sleeping
FET switch for 5V regulator
Bluetooth module
power off when in USB mode
power off by FET switch
AVR configuration
unused pins
ADC
SET CONTROL CONFIG
------------------
SET CONTROL CONFIG 4810
SET CONTROL CONFIG LIST
SET CONTROL CONFIG 0000 0000 4910 DEEP_SLEEP KLUDGE INTERACTIVE_PIN UART_LATENCY
Bit14 UART low latency
Bit11 Interactive pairing mode
Bit04 Deep sleep
Reconnection
------------
SET CONTROL AUTOCALL 1124 5000 HID
1124 HID service class
5000 interval ms
HID profile
-----------
This is needed to configure only once.
SET PROFILE HID ON
RESET
HID class
---------
SET BT CLASS 005C0 // keyboard/mouse combined devie
Pairing Security
----------------
Secure Simple Pairing(SSP)
SET BT SSP 2 0 // Enables SSP for keyboard and Man-in-the-middle protection
SET BT SSP 3 0 // Enables SSP just works mode
for keyboard with SSP
SET BT AUTH * 0000
SET BT SSP 2 0
SET CONTROL CONFIG 800
RESET
for keyboard without SSP
SET BT AUTH * 0000
SET CONTROL CONFIG 800
RESET
AUTH
AUTH xx:xx:xx:xx:xx:xx? // Pairing request event
AUTH xx:xx:xx:xx:xx:xx 0000
SSP PASSKEY 78:dd:08:b7:e4:a2 ?
SSP PASSKEY 78:dd:08:b7:e4:a2 xxxxx
(SSP COMPLETE 78:dd:08:b7:e4:a2 HCI_ERROR_AUTH_FAIL // failed)
RING 0 78:dd:08:b7:e4:a2 11 HID
Connecton
RING xx:xx:xx:xx:xx:xx xx HID // connection event
KILL xx:xx:xx:xx:xx:xx
Mode
----
Command mode
Data mode
Raw mode
(Simple mode not for a real keyboard)
Raw mode
Keyboard:
0x9f, length(10), 0xa1, 0x01, mods, 0x00, key1, key2, key3, key4, key5, key6
Mouse:
0x9f, length(5), 0xa1, 0x02, buttons, X, Y
Consumer page:
0x9f, length(5), 0xa1, 0x03, bitfield1, bitfield2, bitfield3
consumer page suage
Bitfield 1:
0x01 Volume Increment
0x02 Volume Decrement
0x04 Mute
0x08 Play/Pause
0x10 Scan Next Track
0x20 Scan Previous Track
0x40 Stop
0x80 Eject
Bitfield 2:
0x01 Email Reader
0x02 Application Control Search
0x04 AC Bookmarks
0x08 AC Home
0x10 AC Back
0x20 AC Forward
0x40 AC Stop
0x80 AC Refresh
Bitfield 3:
0x01 Application Launch Generic Consumer Control
0x02 AL Internet Browser
0x04 AL Calculator
0x08 AL Terminal Lock / Screensaver
0x10 AL Local Machine Browser
0x20 AC Minimize
0x40 Record
0x80 Rewind
2011/07/13
set
SET BT BDADDR 00:07:80:47:22:14
SET BT NAME HHKB pro BT
SET BT CLASS 0005c0
SET BT AUTH * 0000
SET BT IDENT BT:47 f000 4.1.0 Bluegiga iWRAP
SET BT LAP 9e8b33
SET BT PAGEMODE 4 2000 1
SET BT PAIR 78:dd:08:b7:e4:a2 a191189cd7e51030ad6a07848ce879bb
SET BT POWER 3 3 3
SET BT ROLE 0 f 7d00
SET BT SNIFF 0 20 1 8
SET BT SSP 2 1
SET BT MTU 667
SET CONTROL AUTOCALL 1124 3000 HID
SET CONTROL BAUD 38400,8n1
SET CONTROL CD 00 0
SET CONTROL ECHO 7
SET CONTROL ESCAPE 43 00 1
SET CONTROL GAIN 0 5
SET CONTROL INIT SET CONTROL MUX 0
SET CONTROL MSC DTE 00 00 00 00 00 00
SET CONTROL MUX 1
SET CONTROL PIO 00 00
SET CONTROL READY 00
SET PROFILE HID f HID
SET
info config
!!! THIS IS BETA RELEASE AND MAY BE USED FOR EVALUATION PURPOSES ONLY !!!
WRAP THOR AI (4.1.0 build 435)
Copyright (c) 2003-2011 Bluegiga Technologies Inc.
Compiled on Jun 28 2011 17:19:51, running on WT12-A module, psr v31
AVRCP BGIO FTP HFP HFP_AG HID HID_CONSUMER_PAGE HSP LEDS MAP OTA PBAP PIO=0x00fc SSP SUBRATE TEST VOLUME
- BOCK3 version 435 (Jun 28 2011 17:19:37) (max acl/sco 7/1)
- Bluetooth version 2.1, Power class 2
- Loader 4279, firmware 6297 (56-bit encryption), native execution mode
- up 0 days, 06:23, 2 connections (pool 2)
- User configuration:
&028a = 0001 0000 0000 0011 0024 0000 0000 0010 0000 0080 0000 0000 0080 005f 009b 0034 00fb 0006
&028b = 0000 0bb8
&028d = 0001
&0295 = 0000 0005 000b 0000 0003 0000 0000 0000 0000 0000 0000
&0298 = a006
&0299 = 0000 0000
&02a3 = 0030 0030 0030 0030
&02a4 = 009d 0000
&02a5 = 0053 0045 0054 0020 0043 004f 004e 0054 0052 004f 004c 0020 004d 0055 0058 0020 0030
&02a7 = 0000 05c0
&02a8 = 4910 0000 0000
&02aa = 0004 2000 0001 0033 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
&02ac = 0000 0000 002b 0000 0000 0000 0000 0000 0000 0000 0002 0000 0000 0000 0010 0000 0000 0000 0000 029b 0000 0000 0000 0000
&02ad = 4848 424b 7020 6f72 4220 0054
&02b3 = 0005 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003
&02b7 = 000f 4948 0044
&02bb = 8000
READY.
2011/07/07 settings:
set
SET BT BDADDR 00:07:80:47:22:14
SET BT NAME HHKB Pro BT
SET BT CLASS 0005c0
SET BT AUTH * 000
SET BT IDENT BT:47 f000 4.0.0 Bluegiga iWRAP
SET BT LAP 9e8b33
SET BT PAGEMODE 4 2000 1
SET BT PAIR 78:dd:08:b7:e4:a2 9e54d0aabb1b4d73cfccddb1ea4ef2d6
SET BT POWER 3 3 3
SET BT ROLE 0 f 7d00
SET BT SNIFF 0 20 1 8
SET BT SSP 3 0
SET BT MTU 667
SET CONTROL BAUD 38400,8n1
SET CONTROL CD 00 0
SET CONTROL ECHO 7
SET CONTROL ESCAPE 255 00 1
SET CONTROL GAIN 0 5
SET CONTROL INIT set control mux 0
SET CONTROL MSC DTE 00 00 00 00 00 00
SET CONTROL PREAMP 1 1
SET CONTROL READY 00
SET PROFILE HID HID
SET PROFILE SPP Bluetooth Serial Port
SET
info config
WRAP THOR AI (4.0.0 build 317)
Copyright (c) 2003-2010 Bluegiga Technologies Inc.
Compiled on Apr 20 2010 16:44:28, running on WT12-A module, psr v31
AVRCP FTP PBAP PIO=0x00fc SSP SUBRATE VOLUME
- BOCK3 version 317 (Apr 20 2010 16:44:21) (max acl/sco 7/1)
- Bluetooth version 2.1, Power class 2
- Loader 4279, firmware 6297 (56-bit encryption), native execution mode
- up 0 days, 00:00, 0 connections (pool 1)
- User configuration:
&028c = 0001 0020 0000 0001 0008 0000
&028d = 0000
&0296 = 0047 0001 f000 0400 6c42 6575 6967 6167 6920 5257 5041
&0298 = c006
&02a3 = 0030 0030 0030
&02a4 = 009d 0000
&02a5 = 0073 0065 0074 0020 0063 006f 006e 0074 0072 006f 006c 0020 006d 0075 0078 0020 0030
&02a7 = 0000 05c0
&02a8 = 0800 0000 0000
&02ac = 0000 0000 00ff 0000 0000 0000 0000 0000 0000 0000 0002 0000 0000 0000 0010 0000 0000 0000 0000 029b 0000 0000 0000 0000
&02ad = 4848 424b 5020 6f72 4220 0054
&02b3 = 0004 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003
&02b7 = 0000
&02bb = 6c42 6575 6f74 746f 2068 6553 6972 6c61 5020 726f 0074
READY.
2011/08/23:
SET BT BDADDR 00:07:80:47:22:14
SET BT NAME HHKB pro BT
SET BT CLASS 0005c0
SET BT AUTH * 0000
SET BT IDENT BT:47 f000 4.1.0 Bluegiga iWRAP
SET BT LAP 9e8b33
SET BT PAGEMODE 4 2000 1
SET BT PAIRCOUNT 4
SET BT POWER 3 3 3
SET BT ROLE 1 f 12c0
SET BT SNIFF 10 2 1 8
SET BT SSP 3 0
SET BT MTU 667
SET CONTROL BAUD 38400,8n1
SET CONTROL CD 00 0
SET CONTROL ECHO 7
SET CONTROL ESCAPE 43 00 1
SET CONTROL GAIN 0 5
SET CONTROL INIT SET CONTROL MUX 0
SET CONTROL MSC DTE 00 00 00 00 00 00
SET CONTROL MUX 1
SET CONTROL PIO 00 00
SET CONTROL READY 00
SET PROFILE HID 7 HIDKeyboardMouse
SET
SET CONTROL CONFIG 0000 0004 481e CLOCK_CACHE INTERLACED_INQ INTERLACED_PAGE DEEP_SLEEP INTERACTIVE_PIN UART_LATENCY 23D_NOKLUDGE
2011/08/25:
SET BT BDADDR 00:07:80:47:22:14
SET BT NAME HHKB pro BT
SET BT CLASS 0005c0
SET BT IDENT BT:47 f000 4.1.0 Bluegiga iWRAP
SET BT LAP 9e8b33
SET BT PAGEMODE 4 2000 1
SET BT PAIRCOUNT 4
SET BT PAIR 78:dd:08:b7:e4:a2 0be83335a03fed8ededae42e99554e28
SET BT POWER 3 3 3
SET BT ROLE 1 f 12c0
SET BT SNIFF 100 20 1 8
SET BT SSP 3 0
SET BT MTU 667
SET CONTROL BAUD 38400,8n1
SET CONTROL CD 00 0
SET CONTROL ECHO 7
SET CONTROL ESCAPE - 20 1
SET CONTROL GAIN 0 5
SET CONTROL INIT SET CONTROL MUX 0
SET CONTROL MSC DTE 00 00 00 00 00 00
SET CONTROL MUX 1
SET CONTROL PIO 00 00
SET CONTROL READY 00
SET PROFILE HID f HIDKeyboardMouse
SET
SET CONTROL CONFIG 0000 0000 490e CLOCK_CACHE INTERLACED_INQ INTERLACED_PAGE KLUDGE INTERACTIVE_PIN UART_LATENCY
2011/09/08:
SET CONTROL CONFIG 0000 0000 410e CLOCK_CACHE INTERLACED_INQ INTERLACED_PAGE KLUDGE UART_LATENCY
Removed INTERACTIVE_PIN to avoid interactive auth and use SET BT AUTH pin(0000).
EOF

345
protocol/iwrap/iWRAP5.txt Normal file
View file

@ -0,0 +1,345 @@
Terminology
===========
PSM
HIDP HID Protocol
L2CAP Logical Link Control Adaptation Protocol
MTU Maximum Transmission Unit
HID Protocol Messages
=====================
3 of HID_SPEC_V11.pdf
Control channel PSM=0x0011
Interrupt channel PSM=0x0013
HANDSHAKE(0)
HID_CONTROL(1)
GET_REPORT(4)
-------------
Host requests report(DATA payload on Control channel) from Device
Size Desc
------------------------------------------------------------------------------
HIDP-Hdr 1 7..4: HIDP Message TYpe(4: GET_REPORT)
3: Size(1:2-octed buffer size, 0:size of the report)
2: 0
1..0: Report Type(1:input, 2:output, 3: feature)
ReportID 1 Optional
BufferSize 2 Optional(specified when Size=1)
SET_REPORT(5)
GET_PROTOCOL(6)
SET_PROTOCOL(7)
DATA(A)
-------
Input/Output Report: All DATA payloads flow on Interrupt channel.
Other: flows on Control channel.
Size Desc
------------------------------------------------------------------------------
HIDP-Hdr 1 7..4 0xA
3..2 Reserved(0)
1..0 Report Type(0:Other, 1:Input, 2:Output, 3:Feature)
Payload N Data
Boot Protocol
=============
3.3.2
No report descriptor, fixed report descriptors defined.
Device ReportID Size
---------------------------------
Reserved 0
Keyboard 1 9octets
Mouse 2 4octets
Reserved 3-255
Report descriptor
-----------------
Report ID is added to USB HID boot protocol descriptor.
Boot Protocol device doesn't need to supply descriptors. and can send extra data on end of boot report this data will be ignored unless host supports report descriptor.
Report Protocol devices can have specific descriptors. Using Boot protocol descriptor followed by extra data may be useful for compatibility to Boot protocol only supported host.
NOTE:
Bluegiga HID sample say report ID of mouse is 1 but 2?
Bluegiga HID sample say report ID of consumer page is 2 but 3?
** mouse.desc and consumer.desc were fixed.
size
keyboard.desc 67 0x43
mouse.desc 60 0x3c
consumer.desc 82 0x52
combo.desc 209 0xd1
SDP
===
attributes(3.3.2)
----------
HIDDeviceSubclass
which type is supported in Boot Protocol Mode
7 6
---
0 1 Keyboard
1 0 Pointing device
1 1 Combo keyboard/pointing device
HIDBootDevice
TRUE
HIDReconnectInitiate
TRUE
Class of Device/Service
=======================
http://phys.sci.hokudai.ac.jp/LABS/yts/pic/GB002/Bluetooth_assigned_numbers_baseband.pdf
0x0005C0 Keyboard and Pointing deivce(combo)
23 16 15 8 7 0
---------------------------------
Service |Major |Minor |Format
Format type
1 0
---
0 0
Minor Device Class of Peripheral Major
7 6
---
0 1 Keyboard
1 0 Pointing device
1 1 Combo keyboard/pointing device
Major device classes
12 11 10 9 8
--------------
0 0 0 0 0 Miscellaneous
0 0 0 0 1 Computer
0 0 0 1 0 Phone
0 0 0 1 1 LAN /Network Access point
0 0 1 0 0 Audio/Video (headset,speaker,stereo, video display, vcr.....
0 0 1 0 1 *Peripheral (mouse, joystick, keyboards, ..... )
0 0 1 1 0 Imaging (printing, scanner, camera, display, ...)
1 1 1 1 1 Uncategorized, specific device code not specified
X X X X X All other values reserved
Major service classes
bit
--------------------------------------
13 Limited Discoverable Mode [Ref #1]
14 (reserved)
15 (reserved)
16 Positioning (Location identification)
17 Networking (LAN, Ad hoc, ...)
18 Rendering (Printing, Speaker, ...)
19 Capturing (Scanner, Microphone, ...)
20 Object Transfer (v-Inbox, v-Folder, ...)
21 Audio (Speaker, Microphone, Headset service, ...)
22 Telephony (Cordless telephony, Modem, Headset service, ...)
23 Information (WEB-server, WAP-server, ...)
SET PROFILE HID 0d c0 100 0 en 0409 HHKB pro Bluetooth keyboard
{function bit} uint8
{subclass} uint8
{version} uint16
{country} uint8
{BTlang} char[2]
{USBlang} uint16
{name} string
SET PROFILE HID 0f c0 100 0 en 0409 TMK Bluetooth keyboard
// composite device: keyboard and mouse
SET BT CLASS 005c0
Authentication SSP
-------------------
SET BT SSP 2 0 PASS KEY entering
SET BT SSP 3 0 NO PASS KEY entering
SET BT SSP <capabilities> <mitm>
<capabilities>: 0:display only 1:display+yes/no button 2:keyboard only 3:none
SET BT SSP 2 1 # 2:keyboard only 1:Man-in-the-middle protection is needed
SET BT SSP 2 0 # 2:keyboard only 0:Man-in-the-middle protection is not needed
SET BT SSP 2 1
bond only if MITM protection is supported by host
SET BT SSP 2 0
bond even if MITM protection is not supported by host
On Windows 'Add device' causes SSP PASSKEY event on iWRAP
SSP PASSKEY 78:dd:08:b7:e4:a2 ?
If device has display(0 or 1) this event occurs. User should be shown this code on the device.
SSP CONFIRM 78:dd:08:b7:e4:a2 517572
SET BT SSP 3 0
No input/output, No MITM protection.
Without procedure of authentication the divice is bond to host.
Connect
=======
CALL 78:dd:08:b7:e4:a2 11 HID
Setting
========
SET BT PAIR *
SET RESET
SET BT CLASS 0005c0
SET BT AUTH * 0000
SET BT SSP 2 0
SET CONTROL CONFIG 800
SET PROFILE HID 0f c0 0100 00 en 0409 Bluetooth keyboard
SET PROFILE SPP
SET CONTROL INIT SET CONTROL MUX 0
SET BT NAME TMK Blootooth WT12
SET PROFILE HID 0f c0 0100 00 en 0409 TMK Bluetooth keyboard(WT12)
SDP ADD 1124 HID
SET BT PAIRCOUNT 4
SET BT POWER 3 3 3
SET BT SNIFF 100 20 1 8
RESET
SET CONTROL BAUD 38400,8n1
# combo keyboard + mouse
HID SET 7f 05010906a1010507850119e029e715002501750195088102950175088101950575010508850119012905910295017503910395067508150025650507190029658100c005010902a1010901a1008502050919012903150025019503750181020501093815f1250f9501750581060501093009311581257f750895028106c0c0
HID SET d1 05010906a1010507850119e029e715002501750195088102950175088101950575010508850119012905910295017503910395067508150025650507190029658100c005010902a1010901a1008502050919012903150025019503750181020501093815f1250f9501750581060501093009311581257f750895028106c0c0050c0901a1018503050c1500250109e909ea09e209cd19b529b87501950881020a8a010a21020a2a021a23022a27027501950881020a83010a96010a92010a9e010a94010a060209b209b4750195088102c0
---------------------
SET BT BDADDR 00:07:80:47:22:14
SET BT NAME TMK BT WT12
SET BT CLASS 0005c0
SET BT AUTH * 0000
SET BT IDENT BT:47 f000 5.0.1 Bluegiga iWRAP
SET BT LAP 9e8b33
SET BT PAGEMODE 4 2000 1
SET BT PAIRCOUNT 4
SET BT PAIR 78:dd:08:b7:e4:a2 fe2fd79e86c6bbfa9351a032bceb2648
SET BT POWER 3 3 3
SET BT ROLE 1 f 12c0
SET BT SNIFF 100 20 1 8
SET BT SSP 3 0
SET BT MTU 672
SET CONTROL BAUD 38400,8n1
SET CONTROL CD 00 0
SET CONTROL ECHO 7
SET CONTROL ESCAPE - 20 1
SET CONTROL GAIN 0 5
SET CONTROL INIT SET CONTROL MUX 0
SET CONTROL MSC DTE 00 00 00 00 00 00
SET CONTROL PIO 00 00
SET CONTROL READY 00
SET PROFILE HID 0f c0 0100 00 en 0409 TMK Bluetooth keyboard
SET
SET control config list
SET CONTROL CONFIG 0000 0000 0000 410e CLOCK_CACHE INTERLACED_INQ INTERLACED_PAGE KLUDGE UART_LATENCY
WRAP THOR AI (5.0.1 build 620)
Copyright (c) 2003-2012 Bluegiga Technologies Inc.
Compiled on Oct 1 2012 10:56:21, running on WT12-A module, psr v31
BGIO FTP HFP HFP_AG HID HID_CONSUMER_PAGE HSP MAP MDP OTA PBAP PIO=0x00fc SSP SUBRATE TEST VOLUME
- BOCK4 version 620 (Oct 1 2012 10:56:03) (max acl/sco 7/1)
- Bluetooth version 3.0, Power class 2
- Loader 8615, firmware 8825 (56-bit encryption), native execution mode
- up 0 days, 00:13, 0 connections (pool 1)
- User configuration:
&028b = 0000 1388
&028c = 0001 0020 0100 0001 0008 0000
&028d = 0000
&0295 = 0000 0005 000b 0000 0003 0000 0000 0000 0000 0000 0000
&0298 = c006
&0299 = 0000 0000
&02a3 = 0030 0030 0030 0030
&02a4 = 009d 0000
&02a5 = 0053 0045 0054 0020 0043 004f 004e 0054 0052 004f 004c 0020 004d 0055 0058 0020 0030
&02a7 = 0000 05c0
&02a8 = 400e 0000 0000
&02aa = 0004 2000 0001 0033 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
&02ab = 0001 000f 12c0
&02ac = 0000 0020 002b 0000 0000 0000 0000 0000 0000 0000 000a 0000 0000 0000 0004 0000 0000 0000 0000 02a0 0000 0000 0000 0000
&02ad = 4d54 204b 5442 5720 3154 0032
&02b0 = fa65 b0aa 934a 077b a600 d1cc fe58 8dd5
&02b3 = 0004 0004 0004 0000 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 000d 0007 0005 8afb 0005 0000 1c13 0000 0c3d 0005 b435 0006 b450 0006 0000 1416 000d
&02b7 = 000f 00c0 0100 0000 0065 006e 0409 4d54 204b 6c42 6575 6f74 746f 2068 656b 6279 616f 6472 0000
---------------------
----------
after SET RESET
----------
WRAP THOR AI (5.0.1 build 620)
Copyright (c) 2003-2012 Bluegiga Technologies Inc.
READY.
set
SET BT BDADDR 00:07:80:47:22:14
SET BT NAME WT12
SET BT CLASS 001f00
SET BT IDENT BT:47 f000 5.0.1 Bluegiga iWRAP
SET BT LAP 9e8b33
SET BT PAGEMODE 4 2000 1
SET BT POWER 3 3 3
SET BT ROLE 0 f 7d00
SET BT SNIFF 0 20 1 8
SET BT SSP 3 0
SET BT MTU 667
SET CONTROL BAUD 115200,8n1
SET CONTROL CD 00 0
SET CONTROL ECHO 7
SET CONTROL ESCAPE 43 00 1
SET CONTROL GAIN 0 5
SET CONTROL MSC DTE 00 00 00 00 00 00
SET CONTROL PIO 00 00
SET CONTROL READY 00
SET PROFILE SPP Bluetooth Serial Port
SET
SET CONTROL CONFIG 0000 0000 0000 0100 KLUDGE
info config
WRAP THOR AI (5.0.1 build 620)
Copyright (c) 2003-2012 Bluegiga Technologies Inc.
Compiled on Oct 1 2012 10:56:21, running on WT12-A module, psr v31
BGIO FTP HFP HFP_AG HID HID_CONSUMER_PAGE HSP MAP MDP OTA PBAP PIO=0x00fc SSP SUBRATE TEST VOLUME
- BOCK4 version 620 (Oct 1 2012 10:56:03) (max acl/sco 7/1)
- Bluetooth version 3.0, Power class 2
- Loader 8615, firmware 8825 (56-bit encryption), native execution mode
- up 0 days, 00:00, 0 connections (pool 1)
- User configuration:
&0295 = 0000 0005 000b 0000 0003 0000 0000 0000 0000 0000 0000
&0299 = 0000 0000
&02aa = 0004 2000 0001 0033 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
&02ac = 0000 0000 002b 0000 0000 0000 0000 0000 0000 0000 0002 0000 0000 0000 0010 0000 0000 0000 0000 029b 0000 0000 0000 0000
&02ad = 5457 3231
&02b0 = fa65 b0aa 934a 077b a600 d1cc fe58 8dd5
READY.
----------

View file

@ -334,7 +334,7 @@ static void send_keyboard(report_keyboard_t *report)
// HID raw mode header
xmit(0x9f);
xmit(0x0a); // Length
xmit(0xa1); // keyboard report
xmit(0xa1); // DATA(Input)
xmit(0x01);
xmit(report->mods);
xmit(0x00); // reserved byte(always 0)
@ -355,9 +355,16 @@ static void send_mouse(report_mouse_t *report)
// HID raw mode header
xmit(0x9f);
xmit(0x05); // Length
xmit(0xa1); // mouse report
xmit(0xa1); // DATA(Input)
xmit(0x02);
xmit(report->buttons);
/* vertical wheel support */
int8_t wheel = report->v;
if (wheel < -15) {
wheel = -15;
} else if (wheel > 15) {
wheel = 15;
}
xmit(((wheel&0x1f)<<3) | (report->buttons&0x07));
xmit(report->x);
xmit(report->y);
MUX_FOOTER(0x01);
@ -457,7 +464,7 @@ static void send_consumer(uint16_t data)
MUX_HEADER(0x01, 0x07);
xmit(0x9f);
xmit(0x05); // Length
xmit(0xa1); // consumer report
xmit(0xa1); // DATA(Input)
xmit(0x03);
xmit(bits1);
xmit(bits2);

View file

@ -0,0 +1 @@
05010906a1010507850119e029e715002501750195088102950175088101950575010508850119012905910295017503910395067508150025650507190029658100c0

View file

@ -25,6 +25,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "keyboard.h"
#include "matrix.h"
#include "host.h"
#include "action.h"
#include "iwrap.h"
#ifdef PROTOCOL_VUSB
# include "vusb.h"
@ -40,7 +41,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
static void sleep(uint8_t term);
static bool console(void);
static uint8_t console_command(uint8_t c);
static bool console_command(uint8_t c);
static uint8_t key2asc(uint8_t key);
@ -108,10 +109,13 @@ static void init_vusb(void)
void change_driver(host_driver_t *driver)
{
/*
host_clear_keyboard_report();
host_swap_keyboard_report();
host_clear_keyboard_report();
host_send_keyboard_report();
*/
clear_keyboard();
_delay_ms(1000);
host_set_driver(driver);
}
@ -168,6 +172,7 @@ int main(void)
if (host_get_driver() == vusb_driver())
vusb_transfer_keyboard();
#endif
// TODO: depricated
if (matrix_is_modified() || console()) {
last_timer = timer_read();
sleeping = false;
@ -176,6 +181,7 @@ int main(void)
iwrap_check_connection();
}
// TODO: suspend.h
if (host_get_driver() == iwrap_driver()) {
if (sleeping && !insomniac) {
_delay_ms(1); // wait for UART to send
@ -201,11 +207,6 @@ static void sleep(uint8_t term)
WD_SET(WD_OFF);
}
ISR(WDT_vect)
{
// wake up
}
static bool console(void)
{
// Send to Bluetoot module WT12
@ -244,12 +245,12 @@ static bool console(void)
}
}
uint8_t command_extra()
bool command_extra(uint8_t code)
{
return console_command(key2asc(host_get_first_key()));
return console_command(key2asc(code));
}
static uint8_t console_command(uint8_t c)
static bool console_command(uint8_t c)
{
switch (c) {
case 'h':

View file

@ -0,0 +1 @@
05010902a1010901a1008502050919012903150025019503750181020501093815f1250f9501750581060501093009311581257f750895028106c0c0

View file

@ -10,10 +10,10 @@ SRC += $(VUSB_DIR)/main.c \
ifdef NO_UART
SRC += sendchar_null.c
SRC += $(COMMON_DIR)/sendchar_null.c
else
SRC += sendchar_uart.c \
uart.c
SRC += $(COMMON_DIR)/sendchar_uart.c \
$(COMMON_DIR)/uart.c
endif