Merge remote-tracking branch 'upstream/master' into develop

This commit is contained in:
fauxpark 2021-06-17 17:22:01 +10:00
commit d04f7bc160
27 changed files with 1401 additions and 27 deletions

View file

@ -131,12 +131,14 @@ You can override the default songs by doing something like this in your `config.
```c
#ifdef AUDIO_ENABLE
#define STARTUP_SONG SONG(STARTUP_SOUND)
# define STARTUP_SONG SONG(STARTUP_SOUND)
#endif
```
A full list of sounds can be found in [quantum/audio/song_list.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/audio/song_list.h) - feel free to add your own to this list! All available notes can be seen in [quantum/audio/musical_notes.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/audio/musical_notes.h).
Additionally, if you with to maintain your own list of songs (such as ones that may be copyrighted) and not have them added to the repo, you can create a `user_song_list.h` file and place it in your keymap (or userspace) folder. This file will be automatically included, it just needs to exist.
To play a custom sound at a particular time, you can define a song like this (near the top of the file):
```c

View file

@ -263,11 +263,25 @@ void oled_write(const char *data, bool invert);
void oled_write_ln(const char *data, bool invert);
// Pans the buffer to the right (or left by passing true) by moving contents of the buffer
// Useful for moving the screen in preparation for new drawing
// Useful for moving the screen in preparation for new drawing
// oled_scroll_left or oled_scroll_right should be preferred for all cases of moving a static
// image such as a logo or to avoid burn-in as it's much, much less cpu intensive
void oled_pan(bool left);
// Returns a pointer to the requested start index in the buffer plus remaining
// buffer length as struct
oled_buffer_reader_t oled_read_raw(uint16_t start_index);
// Writes a string to the buffer at current cursor position
void oled_write_raw(const char *data, uint16_t size);
// Writes a single byte into the buffer at the specified index
void oled_write_raw_byte(const char data, uint16_t index);
// Sets a specific pixel on or off
// Coordinates start at top-left and go right and down for positive x and y
void oled_write_pixel(uint8_t x, uint8_t y, bool on);
// Writes a PROGMEM string to the buffer at current cursor position
// Advances the cursor while writing, inverts the pixels if true
// Remapped to call 'void oled_write(const char *data, bool invert);' on ARM
@ -279,23 +293,9 @@ void oled_write_P(const char *data, bool invert);
// Remapped to call 'void oled_write_ln(const char *data, bool invert);' on ARM
void oled_write_ln_P(const char *data, bool invert);
// Returns a pointer to the requested start index in the buffer plus remaining
// buffer length as struct
oled_buffer_reader_t oled_read_raw(uint16_t start_index);
// Writes a string to the buffer at current cursor position
void oled_write_raw(const char *data, uint16_t size);
// Writes a single byte into the buffer at the specified index
void oled_write_raw_byte(const char data, uint16_t index);
// Writes a PROGMEM string to the buffer at current cursor position
void oled_write_raw_P(const char *data, uint16_t size);
// Sets a specific pixel on or off
// Coordinates start at top-left and go right and down for positive x and y
void oled_write_pixel(uint8_t x, uint8_t y, bool on);
// Can be used to manually turn on the screen if it is off
// Returns true if the screen was on or turns on
bool oled_on(void);

View file

@ -115,7 +115,7 @@ bool oled_initialized = false;
bool oled_active = false;
bool oled_scrolling = false;
uint8_t oled_brightness = OLED_BRIGHTNESS;
uint8_t oled_rotation = 0;
oled_rotation_t oled_rotation = 0;
uint8_t oled_rotation_width = 0;
uint8_t oled_scroll_speed = 0; // this holds the speed after being remapped to ssd1306 internal values
uint8_t oled_scroll_start = 0;
@ -158,7 +158,7 @@ static void InvertCharacter(uint8_t *cursor) {
}
}
bool oled_init(uint8_t rotation) {
bool oled_init(oled_rotation_t rotation) {
#if defined(USE_I2C) && defined(SPLIT_KEYBOARD)
if (!is_keyboard_master()) {
return true;
@ -491,8 +491,9 @@ void oled_write_raw(const char *data, uint16_t size) {
uint16_t cursor_start_index = oled_cursor - &oled_buffer[0];
if ((size + cursor_start_index) > OLED_MATRIX_SIZE) size = OLED_MATRIX_SIZE - cursor_start_index;
for (uint16_t i = cursor_start_index; i < cursor_start_index + size; i++) {
if (oled_buffer[i] == data[i]) continue;
oled_buffer[i] = data[i];
uint8_t c = *data++;
if (oled_buffer[i] == c) continue;
oled_buffer[i] = c;
oled_dirty |= ((OLED_BLOCK_TYPE)1 << (i / OLED_BLOCK_SIZE));
}
}

View file

@ -226,13 +226,17 @@ void oled_write(const char *data, bool invert);
void oled_write_ln(const char *data, bool invert);
// Pans the buffer to the right (or left by passing true) by moving contents of the buffer
// Useful for moving the screen in preparation for new drawing
void oled_pan(bool left);
// Returns a pointer to the requested start index in the buffer plus remaining
// buffer length as struct
oled_buffer_reader_t oled_read_raw(uint16_t start_index);
// Writes a string to the buffer at current cursor position
void oled_write_raw(const char *data, uint16_t size);
// Writes a single byte into the buffer at the specified index
void oled_write_raw_byte(const char data, uint16_t index);
// Sets a specific pixel on or off
@ -251,17 +255,11 @@ void oled_write_P(const char *data, bool invert);
// Remapped to call 'void oled_write_ln(const char *data, bool invert);' on ARM
void oled_write_ln_P(const char *data, bool invert);
// Writes a PROGMEM string to the buffer at current cursor position
void oled_write_raw_P(const char *data, uint16_t size);
#else
// Writes a string to the buffer at current cursor position
// Advances the cursor while writing, inverts the pixels if true
# define oled_write_P(data, invert) oled_write(data, invert)
// Writes a string to the buffer at current cursor position
// Advances the cursor while writing, inverts the pixels if true
// Advances the cursor to the next page, wiring ' ' to the remainder of the current page
# define oled_write_ln_P(data, invert) oled_write(data, invert)
# define oled_write_raw_P(data, size) oled_write_raw(data, size)
#endif // defined(__AVR__)

View file

@ -0,0 +1,62 @@
/* Copyright 2020 melonbred
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
// Defines names for use in layer keycodes and the keymap
enum layer_names {
LAYER0,
LAYER1,
LAYER2,
};
// Tap Dance Declarations
enum {
TD_M_D = 0,
TD_P_M
};
// Tap Dance Definition
qk_tap_dance_action_t tap_dance_actions[] = {
//Tap once for minus, tap twice for divide
[TD_M_D] = ACTION_TAP_DANCE_DOUBLE(KC_PMNS, KC_PSLS),
//Tap once for plus, tap twice for multiply
[TD_P_M] = ACTION_TAP_DANCE_DOUBLE(KC_PPLS, KC_PAST)
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[LAYER0] = LAYOUT_2u(
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
CTL_T(KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
MO(LAYER2), KC_LALT, LT(LAYER1, KC_SPC), KC_SPC, KC_RALT, KC_LGUI
),
[LAYER1] = LAYOUT_2u(
KC_GRV, KC_QUOT, _______, KC_UP, _______, _______, KC_7, KC_8, KC_9, KC_PMNS, KC_PSLS, KC_DEL,
KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_4, KC_5, KC_6, KC_PPLS, KC_PAST, KC_ENT,
KC_LSFT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_1, KC_2, KC_3, XXXXXXX, XXXXXXX, KC_RSFT,
XXXXXXX, _______, _______, KC_0, KC_PDOT, _______
),
[LAYER2] = LAYOUT_2u(
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
KC_VOLU, KC_MPLY, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
KC_VOLD, KC_MUTE, XXXXXXX, XXXXXXX, XXXXXXX, RESET, XXXXXXX, XXXXXXX, KC_RCTL, KC_RALT, KC_DEL, XXXXXXX,
_______, KC_NLCK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
),
};

102
keyboards/kmac_pad/config.h Normal file
View file

@ -0,0 +1,102 @@
/*
Copyright 2021 talsu <talsu84@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x4B4D // KM
#define PRODUCT_ID 0x4143 // AC
#define DEVICE_VER 0x0104
#define MANUFACTURER KBDMania
#define PRODUCT KMAC PAD
/* key matrix size */
#define MATRIX_ROWS 6
#define MATRIX_COLS 4
/*
* Keyboard Matrix Assignments
* The KMAC uses demultiplexers for the cols, they are only included here as documentation.
* See matrix.c for more details.
*/
#define MATRIX_ROW_PINS { E2, D0, D1, D2, D3, D5 }
#define MATRIX_COL_PINS { C7, C6, B6, B5 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL*/
// #define DIODE_DIRECTION COL2ROW
// #define LED_CAPS_LOCK_PIN B0
// #define LED_SCROLL_LOCK_PIN E6
// #define LED_PIN_ON_STATE 0
/* number of backlight levels */
// #define BACKLIGHT_LEVELS 3
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION

View file

@ -0,0 +1,35 @@
{
"keyboard_name": "KMAC PAD",
"maintainer": "talsu",
"width": 4,
"height": 6.5,
"layouts": {
"LAYOUT": {
"layout": [
{"label":"K00", "x":3, "y":0},
{"label":"K10", "x":0, "y":1.25},
{"label":"K11", "x":1, "y":1.25},
{"label":"K12", "x":2, "y":1.25},
{"label":"K13", "x":3, "y":1.25},
{"label":"K20", "x":0, "y":2.25},
{"label":"K21", "x":1, "y":2.25},
{"label":"K22", "x":2, "y":2.25},
{"label":"K23", "x":3, "y":2.25, "h":2},
{"label":"K30", "x":0, "y":3.25},
{"label":"K31", "x":1, "y":3.25},
{"label":"K32", "x":2, "y":3.25},
{"label":"K40", "x":0, "y":4.25},
{"label":"K41", "x":1, "y":4.25},
{"label":"K42", "x":2, "y":4.25},
{"label":"K43", "x":3, "y":4.25, "h":2},
{"label":"K50", "x":0, "y":5.25, "w":2},
{"label":"K52", "x":2, "y":5.25}
]
}
}
}

View file

@ -0,0 +1,143 @@
/*
Copyright 2021 talsu <talsu84@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
enum kmac_pad_keycodes {
MD_BOOT = SAFE_RANGE,
MCR1,
MCR2,
MCR3,
MCR4,
MCR5,
MCR6,
MCR7,
MCR8,
MCR9,
MCR10,
MCR11,
MCR12
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT( /* Base */
TG(1),
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
KC_P7, KC_P8, KC_P9, KC_PPLS,
KC_P4, KC_P5, KC_P6,
KC_P1, KC_P2, KC_P3, KC_PENT,
KC_P0, KC_PDOT ),
[1] = LAYOUT( /* FN */
KC_TRNS,
MCR1, MCR2, MCR3, KC_TRNS,
MCR4, MCR5, MCR6, KC_TRNS,
MCR7, MCR8, MCR9,
MCR10, MCR11, MCR12, KC_TRNS,
KC_TRNS, MD_BOOT )
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case MD_BOOT:
{
static uint32_t key_timer;
if (record->event.pressed) {
key_timer = timer_read32();
} else {
if (timer_elapsed32(key_timer) >= 2000) {
reset_keyboard();
}
}
return false;
}
case MCR1:
if (record->event.pressed) {
SEND_STRING("Macro 1");
}
return false;
case MCR2:
if (record->event.pressed) {
SEND_STRING("Macro 2");
}
return false;
case MCR3:
if (record->event.pressed) {
SEND_STRING("Macro 3");
}
return false;
case MCR4:
if (record->event.pressed) {
SEND_STRING("Macro 4");
}
return false;
case MCR5:
if (record->event.pressed) {
SEND_STRING("Macro 5");
}
return false;
case MCR6:
if (record->event.pressed) {
SEND_STRING("Macro 6");
}
return false;
case MCR7:
if (record->event.pressed) {
SEND_STRING("Macro 7");
}
return false;
case MCR8:
if (record->event.pressed) {
SEND_STRING("Macro 8");
}
return false;
case MCR9:
if (record->event.pressed) {
SEND_STRING("Macro 9");
}
return false;
case MCR10:
if (record->event.pressed) {
SEND_STRING("Macro 10");
}
return false;
case MCR11:
if (record->event.pressed) {
SEND_STRING("Macro 12");
}
return false;
case MCR12:
if (record->event.pressed) {
SEND_STRING("Macro 12");
}
return false;
default:
return true;
}
}
bool led_update_user(led_t led_state) {
writePin(B1, led_state.num_lock);
return false;
}
layer_state_t layer_state_set_user(layer_state_t state) {
writePin(B3, !IS_LAYER_ON_STATE(state, 0));
return state;
}

View file

@ -0,0 +1,61 @@
# The default keymap for KMAC PAD
This is the default keymap. It implements the same features as the official default KMAC PAD firmware.
## Layers
The keymap has two layers. Press the 'FN' key to toggle the Default layer and Function layer.
### Layer 1: Default Layer
,---.
|TG1|
`---'
,---------------.
|NUM| / | * | - |
|---------------|
| 7 | 8 | 9 | |
|-----------| + |
| 4 | 5 | 6 | |
|---------------|
| 1 | 2 | 3 | |
|-----------|Ent|
| 0 | . | |
'---------------'
### Layer 2: Function Layer
,---.
|TG1|
`---'
,---------------.
|M1 |M2 |M3 | |
|---------------|
|M4 |M5 |M6 | |
|-----------| |
|M7 |M8 |M9 | |
|---------------|
|M10|M11|M12| |
|-----------| |
| | | |
'---------------'
## Macros
The default macro is typed with meaningless strings that exist as samples.
| Macro | Action |
|:-----:| -------------------------------------- |
| 1 | Types `Macro 1` |
| 2 | Types `Macro 2` |
| 3 | Types `Macro 3` |
| 4 | Types `Macro 4` |
| 5 | Types `Macro 5` |
| 6 | Types `Macro 6` |
| 7 | Types `Macro 7` |
| 8 | Types `Macro 8` |
| 9 | Types `Macro 9` |
| 10 | Types `Macro 10` |
| 11 | Types `Macro 11` |
| 12 | Types `Macro 12` |

View file

@ -0,0 +1,29 @@
/*
Copyright 2021 talsu <talsu84@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "kmac_pad.h"
void keyboard_pre_init_kb(void) {
/* Set Backlight pin as output
* FN Pin PB3
* PAD Pin PB1
*/
setPinOutput(B3);
setPinOutput(B1);
keyboard_pre_init_user();
}

View file

@ -0,0 +1,37 @@
/*
Copyright 2021 talsu <talsu84@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
#define LAYOUT( \
K00, \
K10, K11, K12, K13, \
K20, K21, K22, K23, \
K30, K31, K32, \
K40, K41, K42, K43, \
K50, K52 \
) \
{ \
{ K00, KC_NO, KC_NO, KC_NO }, \
{ K10, K11, K12, K13 }, \
{ K20, K21, K22, K23 }, \
{ K30, K31, K32, KC_NO }, \
{ K40, K41, K42, K43 }, \
{ K50, KC_NO, K52, KC_NO } \
}

111
keyboards/kmac_pad/matrix.c Normal file
View file

@ -0,0 +1,111 @@
/*
Copyright 2021 talsu <talsu84@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "wait.h"
#include "matrix.h"
#include "quantum.h"
static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
/* Columns 0 - 3
* col / pin:
* 0: C7
* 1: C6
* 2: B6
* 3: B5
*/
static void unselect_cols(void) {
for (uint8_t col = 0; col < MATRIX_COLS; col++) {
setPinOutput(col_pins[col]);
writePinLow(col_pins[col]);
}
}
static void select_col(uint8_t col) {
writePinHigh(col_pins[col]);
}
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) {
bool matrix_changed = false;
// Select col and wait for col selecton to stabilize
select_col(current_col);
wait_us(30);
// row:0 , col:0 FN key is DIRECT_PIN
if (current_col == 0) {
matrix_row_t last_row_value = current_matrix[0];
if (readPin(row_pins[0]) == 0) {
// Pin LO, set col bit
current_matrix[0] |= (1 << current_col);
} else {
// Pin HI, clear col bit
current_matrix[0] &= ~(1 << current_col);
}
// Determine if the matrix changed state
if ((last_row_value != current_matrix[0]) && !(matrix_changed)) {
matrix_changed = true;
}
}
// other row use MATRIX
for (uint8_t row_index = 1; row_index < MATRIX_ROWS; row_index++) {
matrix_row_t last_row_value = current_matrix[row_index];
if (readPin(row_pins[row_index]) == 0) {
// Pin HI, clear col bit
current_matrix[row_index] &= ~(1 << current_col);
} else {
// Pin LO, set col bit
current_matrix[row_index] |= (1 << current_col);
}
// Determine if the matrix changed state
if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) {
matrix_changed = true;
}
}
// Unselect cols
unselect_cols();
return matrix_changed;
}
void matrix_init_custom(void) {
// initialize hardware and global matrix state here
unselect_cols();
// initialize key pins
for (uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) {
setPinInputHigh(row_pins[row_index]);
}
}
bool matrix_scan_custom(matrix_row_t current_matrix[]) {
bool changed = false;
for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
changed |= read_rows_on_col(current_matrix, current_col);
}
return changed;
}

View file

@ -0,0 +1,56 @@
# KMAC PAD
![kmac_pad](https://i.imgur.com/4P1ybgNl.jpg)
KMAC PAD is a num pad keyboard.
It can be used independently, but can also be used by connecting with KMAC keyboard case.
* Keyboard Maintainer: [talsu](https://github.com/talsu)
* Hardware Supported: KMAC PAD
* Hardware Availability: http://www.kbdmania.net/xe/news/5232321
Make example for this keyboard (after setting up your build environment):
make kmac_pad:default
Flashing example for this keyboard:
make kmac_pad:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
The PCB is hardwired to run the bootloader if the key at the `FN` position (the only key in first row) is held down when connecting the keyboard.
## PCB
![Imgur](https://i.imgur.com/ML66cvfl.jpg)
![Imgur](https://i.imgur.com/Kr2Wdtkl.jpg)
### Switch Pins
The FN key in the `Row 0` is directly connected to the E2 pin.
The rest of the rows below that use MATRIX. (`Row 1 ~ Row 5`)
| Row | Pin |
|:-----:| ---------------------- |
| 0 | x (Not in Matrix) |
| 1 | D0 |
| 2 | D1 |
| 3 | D2 |
| 4 | D3 |
| 5 | D5 |
| Column | Pin |
|:------:| --------------------- |
| 0 | C7 |
| 1 | C6 |
| 2 | B6 |
| 3 | B5 |
### Backlight Pins
There are 2 pins for backlight.
The LED of the FN key uses pin `B3`.
All other keys are connected to the `B1` pin.

View file

@ -0,0 +1,29 @@
# MCU name
MCU = atmega32u4
# Processor frequency
F_CPU = 8000000
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
CUSTOM_MATRIX = lite # Custom matrix file
# Project specific files
SRC += matrix.c

61
keyboards/mb44/config.h Normal file
View file

@ -0,0 +1,61 @@
/*
Copyright 2021 melonbred
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x6d62
#define PRODUCT_ID 0x6d62
#define DEVICE_VER 0x0001
#define MANUFACTURER melonbred
/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 12
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { D1, D6, D5, D4 }
#define MATRIX_COL_PINS { C4, C5, C6, C7, B7, B6, B5, B4, B3, B2, B1, B0 }
#define UNUSED_PINS { C2 }
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
/*Encoder Definition*/
#define ENCODERS_PAD_A { D3 }
#define ENCODERS_PAD_B { D2 }
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION

202
keyboards/mb44/info.json Normal file
View file

@ -0,0 +1,202 @@
{
"keyboard_name": "MB-44",
"url": "",
"maintainer": "melonbred",
"width": 3,
"height": 2,
"layouts": {
"LAYOUT_default": {
"layout": [
{"x":0, "y":0},
{"x":1, "y":0},
{"x":2, "y":0},
{"x":3, "y":0},
{"x":4, "y":0},
{"x":5, "y":0},
{"x":6, "y":0},
{"x":7, "y":0},
{"x":8, "y":0},
{"x":9, "y":0},
{"x":10, "y":0},
{"x":11, "y":0, "w":1.75},
{"x":0, "y":1, "w":1.25},
{"x":1.25, "y":1},
{"x":2.25, "y":1},
{"x":3.25, "y":1},
{"x":4.25, "y":1},
{"x":5.25, "y":1},
{"x":6.25, "y":1},
{"x":7.25, "y":1},
{"x":8.25, "y":1},
{"x":9.25, "y":1},
{"x":10.25, "y":1},
{"x":11.25, "y":1, "w":1.5},
{"x":0, "y":2, "w":1.75},
{"x":1.75, "y":2},
{"x":2.75, "y":2},
{"x":3.75, "y":2},
{"x":4.75, "y":2},
{"x":5.75, "y":2},
{"x":6.75, "y":2},
{"x":7.75, "y":2},
{"x":8.75, "y":2},
{"x":9.75, "y":2},
{"x":10.75, "y":2},
{"x":11.75, "y":2},
{"x":0, "y":3},
{"x":1, "y":3},
{"x":2, "y":3},
{"x":3, "y":3, "w":6.25},
{"x":9.75, "y":3},
{"x":10.75, "y":3},
{"x":11.75, "y":3}
]
},
"LAYOUT_2u_split": {
"layout": [
{"x":0, "y":0},
{"x":1, "y":0},
{"x":2, "y":0},
{"x":3, "y":0},
{"x":4, "y":0},
{"x":5, "y":0},
{"x":6, "y":0},
{"x":7, "y":0},
{"x":8, "y":0},
{"x":9, "y":0},
{"x":10, "y":0},
{"x":11, "y":0, "w":1.75},
{"x":0, "y":1, "w":1.25},
{"x":1.25, "y":1},
{"x":2.25, "y":1},
{"x":3.25, "y":1},
{"x":4.25, "y":1},
{"x":5.25, "y":1},
{"x":6.25, "y":1},
{"x":7.25, "y":1},
{"x":8.25, "y":1},
{"x":9.25, "y":1},
{"x":10.25, "y":1},
{"x":11.25, "y":1, "w":1.5},
{"x":0, "y":2, "w":1.75},
{"x":1.75, "y":2},
{"x":2.75, "y":2},
{"x":3.75, "y":2},
{"x":4.75, "y":2},
{"x":5.75, "y":2},
{"x":6.75, "y":2},
{"x":7.75, "y":2},
{"x":8.75, "y":2},
{"x":9.75, "y":2},
{"x":10.75, "y":2},
{"x":11.75, "y":2},
{"x":0, "y":3},
{"x":1, "y":3, "w":1.25},
{"x":2.25, "y":3},
{"x":3.25, "y":3, "w":2.25},
{"x":5.5, "y":3},
{"x":6.5, "y":3, "w":2.75},
{"x":9.75, "y":3},
{"x":10.75, "y":3},
{"x":11.75, "y":3}
]
},
"LAYOUT_2u1u_split": {
"layout": [
{"x":0, "y":0},
{"x":1, "y":0},
{"x":2, "y":0},
{"x":3, "y":0},
{"x":4, "y":0},
{"x":5, "y":0},
{"x":6, "y":0},
{"x":7, "y":0},
{"x":8, "y":0},
{"x":9, "y":0},
{"x":10, "y":0},
{"x":11, "y":0, "w":1.75},
{"x":0, "y":1, "w":1.25},
{"x":1.25, "y":1},
{"x":2.25, "y":1},
{"x":3.25, "y":1},
{"x":4.25, "y":1},
{"x":5.25, "y":1},
{"x":6.25, "y":1},
{"x":7.25, "y":1},
{"x":8.25, "y":1},
{"x":9.25, "y":1},
{"x":10.25, "y":1},
{"x":11.25, "y":1, "w":1.5},
{"x":0, "y":2, "w":1.75},
{"x":1.75, "y":2},
{"x":2.75, "y":2},
{"x":3.75, "y":2},
{"x":4.75, "y":2},
{"x":5.75, "y":2},
{"x":6.75, "y":2},
{"x":7.75, "y":2},
{"x":8.75, "y":2},
{"x":9.75, "y":2},
{"x":10.75, "y":2},
{"x":11.75, "y":2},
{"x":0, "y":3},
{"x":1, "y":3, "w":1.25},
{"x":2.25, "y":3},
{"x":3.25, "y":3, "w":2.75},
{"x":6, "y":3, "w":2.25},
{"x":8.25, "y":3},
{"x":9.75, "y":3},
{"x":10.75, "y":3},
{"x":11.75, "y":3}
]
},
"LAYOUT_3u_split": {
"layout": [
{"x":0, "y":0},
{"x":1, "y":0},
{"x":2, "y":0},
{"x":3, "y":0},
{"x":4, "y":0},
{"x":5, "y":0},
{"x":6, "y":0},
{"x":7, "y":0},
{"x":8, "y":0},
{"x":9, "y":0},
{"x":10, "y":0},
{"x":11, "y":0, "w":1.75},
{"x":0, "y":1, "w":1.25},
{"x":1.25, "y":1},
{"x":2.25, "y":1},
{"x":3.25, "y":1},
{"x":4.25, "y":1},
{"x":5.25, "y":1},
{"x":6.25, "y":1},
{"x":7.25, "y":1},
{"x":8.25, "y":1},
{"x":9.25, "y":1},
{"x":10.25, "y":1},
{"x":11.25, "y":1, "w":1.5},
{"x":0, "y":2, "w":1.75},
{"x":1.75, "y":2},
{"x":2.75, "y":2},
{"x":3.75, "y":2},
{"x":4.75, "y":2},
{"x":5.75, "y":2},
{"x":6.75, "y":2},
{"x":7.75, "y":2},
{"x":8.75, "y":2},
{"x":9.75, "y":2},
{"x":10.75, "y":2},
{"x":11.75, "y":2},
{"x":0, "y":3},
{"x":1, "y":3, "w":1.25},
{"x":2.25, "y":3},
{"x":3.25, "y":3, "w":3},
{"x":6.25, "y":3, "w":3},
{"x":9.75, "y":3},
{"x":10.75, "y":3},
{"x":11.75, "y":3}
]
}
}
}

View file

@ -0,0 +1,59 @@
/* Copyright 2020 melonbred
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
// Defines names for use in layer keycodes and the keymap
enum layer_names {
_BASE,
_LAYER1,
_LAYER2
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT_2u1u_space(
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
CTL_T(KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_SLSH,
MO(_LAYER2), KC_LGUI, KC_LALT, LT(_LAYER1, KC_SPC), KC_RALT, KC_SPC, KC_LEFT, KC_DOWN, KC_RGHT
),
[_LAYER1] = LAYOUT_2u1u_space(
KC_GRV, KC_QUOT, _______, KC_UP, _______, _______, _______, _______, KC_7, KC_8, KC_9, KC_DEL,
KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_PSLS, KC_PMNS, KC_4, KC_5, KC_6, KC_ENT,
KC_LSFT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_PAST, KC_PPLS, KC_1, KC_2, KC_3, KC_RSFT,
_______, KC_LGUI, KC_LALT, XXXXXXX, KC_RALT, KC_SPC, KC_0, KC_PDOT, XXXXXXX
),
[_LAYER2] = LAYOUT_2u1u_space(
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLD,
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
),
};
// Rotary Encoder Functions
void encoder_update_user(uint8_t index, bool clockwise) {
if (index == 0) { /* First encoder */
if (clockwise) {
tap_code(KC_VOLD);
} else {
tap_code(KC_VOLU);
}
}
}

View file

@ -0,0 +1,59 @@
/* Copyright 2020 melonbred
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
// Defines names for use in layer keycodes and the keymap
enum layer_names {
_BASE,
_LAYER1,
_LAYER2
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT_2u_space(
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
CTL_T(KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_SLSH,
MO(_LAYER2), KC_LGUI, KC_LALT, LT(_LAYER1, KC_SPC), KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT
),
[_LAYER1] = LAYOUT_2u_space(
KC_GRV, KC_QUOT, _______, KC_UP, _______, _______, _______, _______, KC_7, KC_8, KC_9, KC_DEL,
KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_PSLS, KC_PMNS, KC_4, KC_5, KC_6, KC_ENT,
KC_LSFT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_PAST, KC_PPLS, KC_1, KC_2, KC_3, KC_RSFT,
_______, KC_LGUI, KC_LALT, XXXXXXX, KC_SPC, KC_RALT, KC_0, KC_PDOT, XXXXXXX
),
[_LAYER2] = LAYOUT_2u_space(
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLD,
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
),
};
// Rotary Encoder Functions
void encoder_update_user(uint8_t index, bool clockwise) {
if (index == 0) { /* First encoder */
if (clockwise) {
tap_code(KC_VOLD);
} else {
tap_code(KC_VOLU);
}
}
}

View file

@ -0,0 +1,67 @@
/* Copyright 2020 melonbred
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
// Defines names for use in layer keycodes and the keymap
enum layer_names {
_BASE,
_LAYER1,
_LAYER2,
_LAYER3
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT_3u_space(
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
CTL_T(KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_SLSH,
MO(_LAYER2), KC_LGUI, KC_LALT, LT(_LAYER1, KC_SPC), LT(_LAYER3, KC_SPC), KC_LEFT, KC_DOWN, KC_RGHT
),
[_LAYER1] = LAYOUT_3u_space(
KC_GRV, KC_QUOT, XXXXXXX, KC_UP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_7, KC_8, KC_9, KC_DEL,
KC_CAPS, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, KC_PSLS, KC_PMNS, KC_4, KC_5, KC_6, KC_ENT,
KC_LSFT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_PAST, KC_PPLS, KC_1, KC_2, KC_3, KC_RSFT,
XXXXXXX, KC_LGUI, KC_LALT, _______, XXXXXXX, KC_0, KC_PDOT, KC_PEQL
),
[_LAYER2] = LAYOUT_3u_space(
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, XXXXXXX, XXXXXXX, KC_RCTL, KC_RALT, KC_DEL, KC_VOLD,
XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
),
[_LAYER3] = LAYOUT_3u_space(
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_UNDS,
XXXXXXX, KC_P1, KC_P2, KC_P3, KC_P4, KC_P5, KC_P6, KC_P7, KC_P8, KC_P9, KC_P0, _______,
_______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______,
_______, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX
),
};
// Rotary Encoder Functions
void encoder_update_user(uint8_t index, bool clockwise) {
if (index == 0) { /* First encoder */
if (clockwise) {
tap_code(KC_VOLD);
} else {
tap_code(KC_VOLU);
}
}
}

View file

@ -0,0 +1,61 @@
/* Copyright 2020 melonbred
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
// Defines names for use in layer keycodes and the keymap
enum layer_names {
_BASE,
_LAYER1,
_LAYER2
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT_default(
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
CTL_T(KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_SLSH,
MO(_LAYER2), KC_LGUI, KC_LALT, LT(_LAYER1, KC_SPC), KC_LEFT, KC_DOWN, KC_RGHT
),
[_LAYER1] = LAYOUT_default(
KC_GRV, KC_QUOT, _______, KC_UP, _______, _______, _______, _______, KC_7, KC_8, KC_9, KC_DEL,
KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_PSLS, KC_PMNS, KC_4, KC_5, KC_6, KC_ENT,
KC_LSFT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_PAST, KC_PPLS, KC_1, KC_2, KC_3, KC_RSFT,
_______, KC_LGUI, KC_LALT, _______, KC_0, KC_PDOT, XXXXXXX
),
[_LAYER2] = LAYOUT_default(
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLD,
_______, XXXXXXX, XXXXXXX, XXXXXXX, KC_DEL, KC_RALT, KC_RCTL
),
};
// Rotary Encoder Functions
void encoder_update_user(uint8_t index, bool clockwise) {
if (index == 0) { /* First encoder */
if (clockwise) {
tap_code(KC_VOLD);
} else {
tap_code(KC_VOLU);
}
}
}

Some files were not shown because too many files have changed in this diff Show more