Fix common files for mbed

This commit is contained in:
tmk 2014-06-17 22:41:14 +09:00
commit e81c70149e
23 changed files with 323 additions and 110 deletions

View file

@ -7,18 +7,18 @@ SRC += $(COMMON_DIR)/host.c \
$(COMMON_DIR)/action_layer.c \
$(COMMON_DIR)/action_util.c \
$(COMMON_DIR)/keymap.c \
$(COMMON_DIR)/avr/timer.c \
$(COMMON_DIR)/print.c \
$(COMMON_DIR)/bootloader.c \
$(COMMON_DIR)/suspend.c \
$(COMMON_DIR)/util.c \
$(COMMON_DIR)/avr/suspend.c \
$(COMMON_DIR)/avr/xprintf.S \
$(COMMON_DIR)/util.c
$(COMMON_DIR)/avr/timer.c \
$(COMMON_DIR)/avr/bootloader.c
# Option modules
ifdef BOOTMAGIC_ENABLE
SRC += $(COMMON_DIR)/bootmagic.c
SRC += $(COMMON_DIR)/eeconfig.c
SRC += $(COMMON_DIR)/avr/eeconfig.c
OPT_DEFS += -DBOOTMAGIC_ENABLE
endif

148
common/avr/bootloader.c Normal file
View file

@ -0,0 +1,148 @@
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <avr/interrupt.h>
#include <avr/wdt.h>
#include <util/delay.h>
#include "bootloader.h"
#ifdef PROTOCOL_LUFA
#include <LUFA/Drivers/USB/USB.h>
#endif
/* Boot Section Size in *BYTEs*
* Teensy halfKay 512
* Teensy++ halfKay 1024
* Atmel DFU loader 4096
* LUFA bootloader 4096
* USBaspLoader 2048
*/
#ifndef BOOTLOADER_SIZE
#warning To use bootloader_jump() you need to define BOOTLOADER_SIZE in config.h.
#define BOOTLOADER_SIZE 4096
#endif
#define FLASH_SIZE (FLASHEND + 1L)
#define BOOTLOADER_START (FLASH_SIZE - BOOTLOADER_SIZE)
/*
* Entering the Bootloader via Software
* http://www.fourwalledcubicle.com/files/LUFA/Doc/120730/html/_page__software_bootloader_start.html
*/
#define BOOTLOADER_RESET_KEY 0xB007B007
uint32_t reset_key __attribute__ ((section (".noinit")));
/* initialize MCU status by watchdog reset */
void bootloader_jump(void) {
#ifdef PROTOCOL_LUFA
USB_Disable();
cli();
_delay_ms(2000);
#endif
#ifdef PROTOCOL_PJRC
cli();
UDCON = 1;
USBCON = (1<<FRZCLK);
UCSR1B = 0;
_delay_ms(5);
#endif
// watchdog reset
reset_key = BOOTLOADER_RESET_KEY;
wdt_enable(WDTO_250MS);
for (;;);
}
/* this runs before main() */
void bootloader_jump_after_watchdog_reset(void) __attribute__ ((used, naked, section (".init3")));
void bootloader_jump_after_watchdog_reset(void)
{
if ((MCUSR & (1<<WDRF)) && reset_key == BOOTLOADER_RESET_KEY) {
reset_key = 0;
// My custom USBasploader requires this to come up.
MCUSR = 0;
// Seems like Teensy halfkay loader requires clearing WDRF and disabling watchdog.
MCUSR &= ~(1<<WDRF);
wdt_disable();
// This is compled into 'icall', address should be in word unit, not byte.
((void (*)(void))(BOOTLOADER_START/2))();
}
}
#if 0
/* Jumping To The Bootloader
* http://www.pjrc.com/teensy/jump_to_bootloader.html
*
* This method doen't work when using LUFA. idk why.
* - needs to initialize more regisers or interrupt setting?
*/
void bootloader_jump(void) {
#ifdef PROTOCOL_LUFA
USB_Disable();
cli();
_delay_ms(2000);
#endif
#ifdef PROTOCOL_PJRC
cli();
UDCON = 1;
USBCON = (1<<FRZCLK);
UCSR1B = 0;
_delay_ms(5);
#endif
/*
* Initialize
*/
#if defined(__AVR_AT90USB162__)
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0;
TIMSK0 = 0; TIMSK1 = 0; UCSR1B = 0;
DDRB = 0; DDRC = 0; DDRD = 0;
PORTB = 0; PORTC = 0; PORTD = 0;
#elif defined(__AVR_ATmega32U4__)
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
TIMSK0 = 0; TIMSK1 = 0; TIMSK3 = 0; TIMSK4 = 0; UCSR1B = 0; TWCR = 0;
DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; TWCR = 0;
PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
#elif defined(__AVR_AT90USB646__)
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
#elif defined(__AVR_AT90USB1286__)
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
#endif
/*
* USBaspLoader
*/
#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__)
// This makes custom USBasploader come up.
MCUSR = 0;
// initialize ports
PORTB = 0; PORTC= 0; PORTD = 0;
DDRB = 0; DDRC= 0; DDRD = 0;
// disable interrupts
EIMSK = 0; EECR = 0; SPCR = 0;
ACSR = 0; SPMCSR = 0; WDTCSR = 0; PCICR = 0;
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0;
ADCSRA = 0; TWCR = 0; UCSR0B = 0;
#endif
// This is compled into 'icall', address should be in word unit, not byte.
((void (*)(void))(BOOTLOADER_START/2))();
}
#endif

45
common/avr/eeconfig.c Normal file
View file

@ -0,0 +1,45 @@
#include <stdint.h>
#include <stdbool.h>
#include <avr/eeprom.h>
#include "eeconfig.h"
void eeconfig_init(void)
{
eeprom_write_word(EECONFIG_MAGIC, EECONFIG_MAGIC_NUMBER);
eeprom_write_byte(EECONFIG_DEBUG, 0);
eeprom_write_byte(EECONFIG_DEFAULT_LAYER, 0);
eeprom_write_byte(EECONFIG_KEYMAP, 0);
eeprom_write_byte(EECONFIG_MOUSEKEY_ACCEL, 0);
#ifdef BACKLIGHT_ENABLE
eeprom_write_byte(EECONFIG_BACKLIGHT, 0);
#endif
}
void eeconfig_enable(void)
{
eeprom_write_word(EECONFIG_MAGIC, EECONFIG_MAGIC_NUMBER);
}
void eeconfig_disable(void)
{
eeprom_write_word(EECONFIG_MAGIC, 0xFFFF);
}
bool eeconfig_is_enabled(void)
{
return (eeprom_read_word(EECONFIG_MAGIC) == EECONFIG_MAGIC_NUMBER);
}
uint8_t eeconfig_read_debug(void) { return eeprom_read_byte(EECONFIG_DEBUG); }
void eeconfig_write_debug(uint8_t val) { eeprom_write_byte(EECONFIG_DEBUG, val); }
uint8_t eeconfig_read_default_layer(void) { return eeprom_read_byte(EECONFIG_DEFAULT_LAYER); }
void eeconfig_write_default_layer(uint8_t val) { eeprom_write_byte(EECONFIG_DEFAULT_LAYER, val); }
uint8_t eeconfig_read_keymap(void) { return eeprom_read_byte(EECONFIG_KEYMAP); }
void eeconfig_write_keymap(uint8_t val) { eeprom_write_byte(EECONFIG_KEYMAP, val); }
#ifdef BACKLIGHT_ENABLE
uint8_t eeconfig_read_backlight(void) { return eeprom_read_byte(EECONFIG_BACKLIGHT); }
void eeconfig_write_backlight(uint8_t val) { eeprom_write_byte(EECONFIG_BACKLIGHT, val); }
#endif

98
common/avr/suspend.c Normal file
View file

@ -0,0 +1,98 @@
#include <stdbool.h>
#include <avr/sleep.h>
#include <avr/wdt.h>
#include <avr/interrupt.h>
#include "matrix.h"
#include "action.h"
#include "backlight.h"
#include "suspend_avr.h"
#include "suspend.h"
#define wdt_intr_enable(value) \
__asm__ __volatile__ ( \
"in __tmp_reg__,__SREG__" "\n\t" \
"cli" "\n\t" \
"wdr" "\n\t" \
"sts %0,%1" "\n\t" \
"out __SREG__,__tmp_reg__" "\n\t" \
"sts %0,%2" "\n\t" \
: /* no outputs */ \
: "M" (_SFR_MEM_ADDR(_WD_CONTROL_REG)), \
"r" (_BV(_WD_CHANGE_BIT) | _BV(WDE)), \
"r" ((uint8_t) ((value & 0x08 ? _WD_PS3_MASK : 0x00) | \
_BV(WDIE) | (value & 0x07)) ) \
: "r0" \
)
void suspend_power_down(void)
{
#ifdef BACKLIGHT_ENABLE
backlight_set(0);
#endif
#ifndef NO_SUSPEND_POWER_DOWN
// Enable watchdog to wake from MCU sleep
cli();
wdt_reset();
// Watchdog Interrupt and System Reset Mode
//wdt_enable(WDTO_1S);
//WDTCSR |= _BV(WDIE);
// Watchdog Interrupt Mode
wdt_intr_enable(WDTO_120MS);
// TODO: more power saving
// See PicoPower application note
// - I/O port input with pullup
// - prescale clock
// - BOD disable
// - Power Reduction Register PRR
// sleep in power down mode
set_sleep_mode(SLEEP_MODE_PWR_DOWN);
sleep_enable();
sei();
sleep_cpu();
sleep_disable();
// Disable watchdog after sleep
wdt_disable();
#endif
}
bool suspend_wakeup_condition(void)
{
matrix_scan();
for (uint8_t r = 0; r < MATRIX_ROWS; r++) {
if (matrix_get_row(r)) return true;
}
return false;
}
// run immediately after wakeup
void suspend_wakeup_init(void)
{
// clear keyboard state
clear_keyboard();
#ifdef BACKLIGHT_ENABLE
backlight_init();
#endif
}
#ifndef NO_SUSPEND_POWER_DOWN
/* watchdog timeout */
ISR(WDT_vect)
{
/* wakeup from MCU sleep mode */
/*
// blink LED
static uint8_t led_state = 0;
static uint8_t led_count = 0;
led_count++;
if ((led_count & 0x07) == 0) {
led_set((led_state ^= (1<<USB_LED_CAPS_LOCK)));
}
*/
}
#endif

27
common/avr/suspend_avr.h Normal file
View file

@ -0,0 +1,27 @@
#ifndef SUSPEND_AVR_H
#define SUSPEND_AVR_H
#include <stdint.h>
#include <stdbool.h>
#include <avr/sleep.h>
#include <avr/wdt.h>
#include <avr/interrupt.h>
#define wdt_intr_enable(value) \
__asm__ __volatile__ ( \
"in __tmp_reg__,__SREG__" "\n\t" \
"cli" "\n\t" \
"wdr" "\n\t" \
"sts %0,%1" "\n\t" \
"out __SREG__,__tmp_reg__" "\n\t" \
"sts %0,%2" "\n\t" \
: /* no outputs */ \
: "M" (_SFR_MEM_ADDR(_WD_CONTROL_REG)), \
"r" (_BV(_WD_CHANGE_BIT) | _BV(WDE)), \
"r" ((uint8_t) ((value & 0x08 ? _WD_PS3_MASK : 0x00) | \
_BV(WDIE) | (value & 0x07)) ) \
: "r0" \
)
#endif

View file

@ -32,8 +32,8 @@ extern "C" {
extern bool keyboard_nkro;
#endif
uint8_t keyboard_idle;
uint8_t keyboard_protocol;
extern uint8_t keyboard_idle;
extern uint8_t keyboard_protocol;
/* host driver */

View file

@ -15,7 +15,6 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <util/delay.h>
#include "keyboard.h"
#include "matrix.h"
#include "keymap.h"

View file

@ -14,7 +14,6 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <avr/pgmspace.h>
#include "keymap.h"
#include "report.h"
#include "keycode.h"

4
common/mbed/bootloader.c Normal file
View file

@ -0,0 +1,4 @@
#include "bootloader.h"
void bootloader_jump(void) {}

6
common/mbed/suspend.c Normal file
View file

@ -0,0 +1,6 @@
#include <stdbool.h>
void suspend_power_down(void) {}
bool suspend_wakeup_condition(void) { return true; }
void suspend_wakeup_init(void) {}

46
common/mbed/xprintf.cpp Normal file
View file

@ -0,0 +1,46 @@
#include <cstdarg>
//#include <stdarg.h>
#include "mbed.h"
#include "mbed/xprintf.h"
#define STRING_STACK_LIMIT 120
/* mbed Serial */
Serial ser(UART_TX, UART_RX);
/* TODO: Need small implementation for embedded */
int xprintf(const char* format, ...)
{
/* copy from mbed/common/RawSerial.cpp */
std::va_list arg;
va_start(arg, format);
int len = vsnprintf(NULL, 0, format, arg);
if (len < STRING_STACK_LIMIT) {
char temp[STRING_STACK_LIMIT];
vsprintf(temp, format, arg);
ser.puts(temp);
} else {
char *temp = new char[len + 1];
vsprintf(temp, format, arg);
ser.puts(temp);
delete[] temp;
}
va_end(arg);
return len;
/* Fail: __builtin_va_arg_pack?
* https://gcc.gnu.org/onlinedocs/gcc-4.3.5/gcc/Constructing-Calls.html#Constructing-Calls
void *arg = __builtin_apply_args();
void *ret = __builtin_apply((void*)(&(ser.printf)), arg, 100);
__builtin_return(ret)
*/
/* Fail: varargs can not be passed to printf
//int r = ser.printf("test %i\r\n", 123);
va_list arg;
va_start(arg, format);
int r = ser.printf(format, arg);
va_end(arg);
return r;
*/
}

17
common/mbed/xprintf.h Normal file
View file

@ -0,0 +1,17 @@
#ifndef XPRINTF_H
#define XPRINTF_H
//#define xprintf(format, ...) __xprintf(format, ##__VA_ARGS__)
#ifdef __cplusplus
extern "C" {
#endif
int xprintf(const char *format, ...);
#ifdef __cplusplus
}
#endif
#endif

View file

@ -16,7 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <util/delay.h>
#include "keycode.h"
#include "host.h"
#include "timer.h"

View file

@ -52,12 +52,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#endif
uint8_t mk_delay;
uint8_t mk_interval;
uint8_t mk_max_speed;
uint8_t mk_time_to_max;
uint8_t mk_wheel_max_speed;
uint8_t mk_wheel_time_to_max;
#ifdef __cplusplus
extern "C" {
#endif
extern uint8_t mk_delay;
extern uint8_t mk_interval;
extern uint8_t mk_max_speed;
extern uint8_t mk_time_to_max;
extern uint8_t mk_wheel_max_speed;
extern uint8_t mk_wheel_time_to_max;
void mousekey_task(void);
@ -66,4 +70,8 @@ void mousekey_off(uint8_t code);
void mousekey_clear(void);
void mousekey_send(void);
#ifdef __cplusplus
}
#endif
#endif

11
common/progmem.h Normal file
View file

@ -0,0 +1,11 @@
#ifndef PROGMEM_H
#define PROGMEM_H 1
#if defined(__AVR__)
# include <avr/pgmspace.h>
#elif defined(__arm__)
# define PROGMEM
# define pgm_read_byte(p) *(p)
#endif
#endif

View file

@ -3,26 +3,6 @@
#include <stdint.h>
#include <stdbool.h>
#include <avr/sleep.h>
#include <avr/wdt.h>
#include <avr/interrupt.h>
#define wdt_intr_enable(value) \
__asm__ __volatile__ ( \
"in __tmp_reg__,__SREG__" "\n\t" \
"cli" "\n\t" \
"wdr" "\n\t" \
"sts %0,%1" "\n\t" \
"out __SREG__,__tmp_reg__" "\n\t" \
"sts %0,%2" "\n\t" \
: /* no outputs */ \
: "M" (_SFR_MEM_ADDR(_WD_CONTROL_REG)), \
"r" (_BV(_WD_CHANGE_BIT) | _BV(WDE)), \
"r" ((uint8_t) ((value & 0x08 ? _WD_PS3_MASK : 0x00) | \
_BV(WDIE) | (value & 0x07)) ) \
: "r0" \
)
void suspend_power_down(void);

View file

@ -18,6 +18,8 @@ OBJECTS = \
$(OBJDIR)/./mbed_driver.o \
$(OBJDIR)/./main.o
CONFIG_H = config.h
SYS_OBJECTS =
INCLUDE_PATHS = -I.
@ -25,6 +27,12 @@ INCLUDE_PATHS = -I.
LIBRARY_PATHS =
LIBRARIES =
# Build Options
# Comment out to disable
#BOOTMAGIC_ENABLE = yes
MOUSEKEY_ENABLE = yes
include mbed.mk
include common.mk
include gcc.mk

View file

@ -1,21 +1,79 @@
COMMON_DIR = common
OBJECTS += \
$(OBJDIR)/$(COMMON_DIR)/mbed/timer.o \
$(OBJDIR)/$(COMMON_DIR)/mbed/xprintf.o \
$(OBJDIR)/$(COMMON_DIR)/action.o \
$(OBJDIR)/$(COMMON_DIR)/action_tapping.o \
$(OBJDIR)/$(COMMON_DIR)/action_macro.o \
$(OBJDIR)/$(COMMON_DIR)/action_layer.o \
$(OBJDIR)/$(COMMON_DIR)/action_util.o \
$(OBJDIR)/$(COMMON_DIR)/host.o \
$(OBJDIR)/$(COMMON_DIR)/keymap.o \
$(OBJDIR)/$(COMMON_DIR)/keyboard.o \
$(OBJDIR)/$(COMMON_DIR)/util.o \
$(OBJDIR)/$(COMMON_DIR)/mbed/suspend.o \
$(OBJDIR)/$(COMMON_DIR)/mbed/timer.o \
$(OBJDIR)/$(COMMON_DIR)/mbed/xprintf.o \
$(OBJDIR)/$(COMMON_DIR)/mbed/bootloader.o \
INCLUDE_PATHS += \
-I$(TMK_DIR)/$(COMMON_DIR)
CC_FLAGS += -include $(CONFIG_H)
# $(OBJDIR)/$(COMMON_DIR)/keyboard.o \
# $(OBJDIR)/$(COMMON_DIR)/keymap.o \
# $(OBJDIR)/$(COMMON_DIR)/bootloader.o \
# $(OBJDIR)/$(COMMON_DIR)/suspend.o \
# Option modules
ifdef BOOTMAGIC_ENABLE
$(error Not Supported)
OBJECTS += $(OBJDIR)/$(COMMON_DIR)/bootmagic.o
OBJECTS += $(OBJDIR)/$(COMMON_DIR)/mbed/eeprom.o
OPT_DEFS += -DBOOTMAGIC_ENABLE
endif
ifdef MOUSEKEY_ENABLE
OBJECTS += $(OBJDIR)/$(COMMON_DIR)/mousekey.o
OPT_DEFS += -DMOUSEKEY_ENABLE
OPT_DEFS += -DMOUSE_ENABLE
endif
ifdef EXTRAKEY_ENABLE
$(error Not Supported)
OPT_DEFS += -DEXTRAKEY_ENABLE
endif
ifdef CONSOLE_ENABLE
$(error Not Supported)
OPT_DEFS += -DCONSOLE_ENABLE
else
OPT_DEFS += -DNO_PRINT
OPT_DEFS += -DNO_DEBUG
endif
ifdef COMMAND_ENABLE
$(error Not Supported)
SRC += $(COMMON_DIR)/command.c
OPT_DEFS += -DCOMMAND_ENABLE
endif
ifdef NKRO_ENABLE
$(error Not Supported)
OPT_DEFS += -DNKRO_ENABLE
endif
ifdef SLEEP_LED_ENABLE
$(error Not Supported)
SRC += $(COMMON_DIR)/sleep_led.c
OPT_DEFS += -DSLEEP_LED_ENABLE
OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
endif
ifdef BACKLIGHT_ENABLE
$(error Not Supported)
SRC += $(COMMON_DIR)/backlight.c
OPT_DEFS += -DBACKLIGHT_ENABLE
endif
ifdef KEYMAP_SECTION_ENABLE
$(error Not Supported)
OPT_DEFS += -DKEYMAP_SECTION_ENABLE
EXTRALDFLAGS = -Wl,-L$(TOP_DIR),-Tldscript_keymap_avr5.x
endif

View file

@ -0,0 +1,7 @@
#ifndef CONFIG_H
#define CONFIG_H
#define MATRIX_ROWS 1
#define MATRIX_COLS 1
#endif

View file

@ -10,7 +10,8 @@ SIZE = $(GCC_BIN)arm-none-eabi-size
CHKSUM = ~/Dropbox/MBED/tool/lpc-vector-checksum
CPU = -mcpu=cortex-m0 -mthumb
CC_FLAGS = $(CPU) -c -g -fno-common -fmessage-length=0 -Wall -fno-exceptions -ffunction-sections -fdata-sections
CC_FLAGS += $(CPU) -c -g -fno-common -fmessage-length=0 -Wall -fno-exceptions -ffunction-sections -fdata-sections
CC_FLAGS += -MMD -MP
CC_SYMBOLS = -DTARGET_LPC11U35_401 -DTARGET_M0 -DTARGET_NXP -DTARGET_LPC11UXX -DTOOLCHAIN_GCC_ARM -DTOOLCHAIN_GCC -D__CORTEX_M0 -DARM_MATH_CM0 -DMBED_BUILD_TIMESTAMP=1399108688.49 -D__MBED__=1

Some files were not shown because too many files have changed in this diff Show more