Matter over Thread Temperature and humidity monitor
- C 73.9%
- Nix 24.1%
- CMake 2%
| Filename | Latest commit message | Latest commit date |
|---|---|---|
- temp sensor confirmed responsive to die heating (27.6 -> 28.6 C under load) - document quantization/calibration: readout sticks to ~1C steps ending in .6 (inherent to ESP32-H2 internal sensor, not a bug) - keep CPU_STRESS_TEST as a debug toggle (default off) |
||
| datasheets | ||
| firmware | ||
| .gitignore | ||
| E-Paper-Segment-Code.zip | ||
| flake.lock | ||
| flake.nix | ||
| LICENSE | ||
| PROJECT_MEMORY.md | ||
| README.md | ||
temphummon
Temperature and humidity monitor using Matter over Thread.
Based on the ESP32-H2 and Waveshare Segment E-Paper display.
BOM
| Product | Price | Wiki |
|---|---|---|
| ESP32-H2 Zero | 3.01 € | wiki |
| 1.9inch Segment E-Paper Module | 9.47 € | wiki |
Matter over Thread Temperature and humidity monitor
Wiring
| ESP32-H2-Zero | E-Paper Module | Wire color |
|---|---|---|
| GPIO4 | SDA | 🟢 Green |
| GPIO5 | SCL | 🟡 Yellow |
| GPIO10 | RST | 🟠 Orange |
| GPIO11 | BUSY | 🔵 Blue |
| 3V3 | VCC | 🔴 Red |
| GND | GND | ⚫ Black |
📖 Project Memory: See
PROJECT_MEMORY.mdfor environment setup, Nix dev shell usage, build status, hardware details, and next steps.